Carbon Steel DIN 2573 Flange manufacturer in India, Check Stainless Steel DIN 2573 PN6 Plate Flange Dimensions and Specifications
The use of stainless steels in the production of flanges is appropriate for several reasons. Aside from the fact that they have outstanding resistance to corrosion, stainless steel alloys are highly ductile, which means it is relatively easy to produce any type of DIN 2573 PN6 Flange. The other properties of these flanges are usually set by means of heat treatment, thereby sealing the inherent properties of the material within the DIN 2573 Flange. Alloy grades such as 304, 316, 310, 347 and 321 are very commonly used in the manufacture of the DIN 2573 PN 6 dn 100 Flange. While every alloy grade has different properties at varying degrees, their mechanical strength and corrosion resistance against various acidic, alkaline and neutral solutions, with prolonged longevity make it an investment across several industries. The DIN standards usually guide the manufacturers with the type of construction, material to be used, sizes, pressure ratings, tolerances, as well as the DIN 2573 Standard Flange Dimension. Flanges are widely used for inspection, modification or even cleaning piping systems.
Over several years, piping systems may need intermediate inspections and repair work for optimum performance. They also require periodic cleaning, which can be done by using the DIN 2573 PN6 Blind Flange. Though the use of stainless steel may not be feasible to some industries on account of the higher cost of producing the Stainless Steel DIN 2573 PN6 Plate Flange, the mechanical properties are much higher and they have better performance across several temperature settings.
DIN 2573 PN6 Flange
DIN 2573 PN6 Plate Flange
DIN 2573 PN6 Blind Flange
Specification List Of DIN 2573 Flange
| Available Forms and Types | Small Male Female (SMF), Lap Joint Face (LJF), Small Tongue, Groove Flat Face (FF), Ring Type Joint (RTJ), Large Male Female (LMF), Large Tongue & Groove, Raised Face (RF) |
| Different Standards | ANSI B16.47 Series A & B, ASA, ANSI B16.5, API-605, AWWA, MSS SP44, Custom Drawings |
| DIN Standards | DIN2642, DIN2638, DIN2673 DIN2629, DIN 2631, DIN2655, DIN2656, DIN2627, DIN2628, DIN2632, DIN2633, DIN2634, DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2636, DIN2637, DIN2635 |
| British Standards | BS4504, BS1560, BS4504 , BS10 |
| Japanese Standards | 16K 63K, 20K, 30K, 5K, 10K, 40K, |
| Size Range | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Pressure Rate | Class 900, Class 2500, Class 150, Class 1500, Class 300, Class 600, |
| VAS Services | Zinc Forged, Oil Black Paint, Yellow Transparent, Cold and Hot Dip Galvanized, Antirust Paint |
Get instant delivery of Copper Nickel DIN 2573 Standard Flange, Check Alloy Steel DIN 2573 PN6 Flange Dimension.
DIN 2573 PN6 Flange Dimensions
| NPS | Flanges | Screws | Weight (7,85 Kg/dm3) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rated Diam. |
d1 | d5 | D | b | c | k | Holes | Thread | d2 | Kg | |
| ISO Series 1 | DIN Series 2 | ||||||||||
| 15 | - | 20 | 21 | 80 | 12 | 5 | 55 | 4 | M 10 | 11 | 0,41 |
| 21,3 | - | 22 | |||||||||
| 20 | - | 25 | 26 | 90 | 14 | 5 | 65 | 4 | M 10 | 11 | 0,60 |
| 26,9 | - | 27,6 | |||||||||
| 25 | - | 30 | 31 | 100 | 14 | 5 | 75 | 4 | M 10 | 11 | 0,74 |
| 33,7 | - | 34,4 | |||||||||
| 32 | - | 38 | 39 | 120 | 16 | 5 | 90 | 4 | M 12 | 14 | 1,19 |
| 42,4 | - | 43,1 | |||||||||
| 40 | - | 44,5 | 45,5 | 130 | 16 | 5 | 100 | 4 | M 12 | 14 | 1,39 |
| 48,3 | - | 49 | |||||||||
| 50 | - | 57 | 58,1 | 140 | 16 | 6 | 110 | 4 | M 12 | 14 | 1,53 |
| 60,3 | - | 61,1 | |||||||||
| 65 | 76,1 | - | 77,1 | 160 | 16 | 6 | 130 | 4 | M 12 | 14 | 1,89 |
| 80 | 88,9 | - | 90,3 | 190 | 18 | 7 | 150 | 4 | M 16 | 18 | 2,98 |
| 100 | - | 108 | 109,6 | 210 | 18 | 7 | 170 | 4 | M 16 | 18 | 3,46 |
| 114,3 | - | 115,9 | |||||||||
| 125 | - | 133 | 134,8 | 240 | 20 | 7 | 200 | 8 | M 16 | 18 | 4,60 |
| 139,7 | - | 141,6 | |||||||||
| 150 | - | 159 | 161,1 | 265 | 20 | 7 | 225 | 8 | M 16 | 18 | 5,22 |
| 168,3 | - | 170,5 | |||||||||
| 200 | 219,1 | - | 221,8 | 320 | 22 | 7 | 280 | 8 | M 16 | 18 | 7,15 |
| 250 | - | 267 | 270,2 | 375 | 24 | 7 | 335 | 12 | M 16 | 18 | 9,61 |
| 273 | - | 276,2 | |||||||||
| 300 | 323,9 | - | 327,6 | 440 | 24 | 7 | 395 | 12 | M 20 | 22 | 12,60 |
| 350 | 355,6 | - | 359,7 | 490 | 26 | 7 | 445 | 12 | M 20 | 22 | 15,60 |
| - | 368 | 372,2 | |||||||||
| 400 | 406,4 | - | 411 | 540 | 28 | 7 | 495 | 16 | M 20 | 22 | 18,40 |
| - | 419 | 423,7 | |||||||||
| (450)* | 457 | - | 462,5 | 595 | 30 | 7 | 550 | 16 | M 20 | 22 | 21,40 |
| 500 | 508 | - | 531,6 | 645 | 30 | 7 | 600 | 20 | M 20 | 22 | 24,60 |
Fast Delivery On Duplex Steel DIN 2573 PN 6 dn 100 Flange In India, Suppliers Of DIN 2573 PN6 Blind Flange, Check Availability Of MSS SP-75 Stainless Steel DIN 2573 PN6 RTJ Flange.
Types Of DIN 2573 Standard Flange
10 inch Lap Joint 150# 304L DIN 2573 Standard Flange
3 inch Weldneck 150# Schedule 80 304L FF DIN 2573 PN6 Flange
6 inch Weldneck 300# Schedule 40 304L RF DIN 2573 PN 6 dn 100 Flange
4 inch WN 600# Schedule 20 316L FF DIN 2573 PN6 Blind Flange
1-1/4 inch 300# 316L RF DIN 2573 PN6 RTJ Flange
1/2 inch 1500# 321L RF DIN 2573 PN6 Slip On Flange
1-1/2 inch Weldneck 150# Schedule 60 316L RF DIN 2573 PN6 Flange
1 inch Socket Weld 150# Schedule 180 304L RF Flange Din 2573 Pn6
8 inch Weldneck 150# Schedule 10 316L DIN 2573 PN6
2 inch 316L Stainless Steel FF DIN 2573 PN6 Flange
DIN 2573 PN6 Blind Flange Pressure Rating Chart
Temperature | ||||||||
Flanges Tables | -10°C to 200°C | 250°C | 300°C | 350°C | 400°C | 425°C | 450°C | 475°C |
6 | 6 | 5.5 | 5 | – | – | – | – | – |
10 | 10 | 9 | 8 | 7 | 6 | – | – | – |
16 | 16 | 15 | 13 | 11 | 9 | – | – | – |
25 | 25 | 24 | 21 | 17 | 14 | 12 | 9 | 6 |
40 | 40 | 38 | 33 | 28 | 23 | 20 | 15 | 10 |
64 | 64 | 61 | 53 | 44 | 36 | 32 | 24 | 16 |
100 | 100 | 95 | 83 | 70 | 57 | 50 | 37 | 25 |
160 | 160 | 152 | 132 | 112 | 92 | 80 | 60 | 40 |
Buy Super Duplex DIN 2573 PN6 Slip On Flange At Best Price, One Stop Shop For All Inconel DIN 2573 PN6 Flange, ASTM A105 CS DIN 2573 PN6 Flange Stockist In India.
DIN 2573 PN6 RTJ Flange Size Chart
| Normal Size Of Pipe (inch) |
|||||
|---|---|---|---|---|---|
| Dia. of Flange (inch) |
No. of Bolts |
Dia. of Bolts (inch) |
Dia. of Bolt Holes (inch) |
Bolt Circle (inch) |
|
| 1/4 | 3-3/8 | 4 | 1/2 | 0.62 | 2-1/4 |
| 1/2 | 3-1/2 | 4 | 1/2 | 0.62 | 2-3/8 |
| 3/4 | 3-7/8 | 4 | 1/2 | 0.62 | 2-3/4 |
| 1 | 4-1/4 | 4 | 1/2 | 0.62 | 3-1/8 |
| 1-1/4 | 4-5/8 | 4 | 1/2 | 0.62 | 3-1/2 |
| 1-1/2 | 5 | 4 | 1/2 | 0.62 | 3-7/8 |
| 2 | 6 | 4 | 5/8 | 0.75 | 4-3/4 |
| 2-1/2 | 7 | 4 | 5/8 | 0.75 | 5-1/2 |
| 3 | 7-1/2 | 4 | 5/8 | 0.75 | 6 |
| 3-1/2 | 8-1/2 | 8 | 5/8 | 0.75 | 7 |
| 4 | 9 | 8 | 5/8 | 0.75 | 7-1/2 |
| 5 | 10 | 8 | 3/4 | 0.88 | 8-1/2 |
| 6 | 11 | 8 | 3/4 | 0.88 | 9-1/2 |
| 8 | 13-1/2 | 8 | 3/4 | 0.88 | 11-3/4 |
| 10 | 16 | 12 | 7/8 | 1 | 14-1/4 |
| 12 | 19 | 12 | 7/8 | 1 | 17 |
| 14 | 21 | 12 | 1 | 1.12 | 18-3/4 |
| 16 | 23-1/2 | 16 | 1 | 1.12 | 21-1/4 |
| 18 | 25 | 16 | 1-1/8 | 1.25 | 22-3/4 |
| 20 | 27-1/2 | 20 | 1-1/8 | 1.25 | 25 |
| 24 | 32 | 20 | 1-1/4 | 1.38 | 29-1/2 |
Looking for the Hastelloy DIN 2573 PN6 Flange Material manufacturer in India? Buy from Rajveer Stainless And Alloy - A leading Flange MSS SP-44 Din 2573 Pn6 Suppliers in Mumbai, Get DIN 2573 PN6 At Best Price In India.
DIN 2573 PN6 Slip On Flange Schedule Chart
| DIN 2573 PN6 Flange Weights by Pressure Class and Size | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | 150# | 300# | 600# | 900# | 1500# | 2500# | ||||||||||||
| WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | |
| 1/2" | 2 | 1 | 1 | 2 | 1 | 1 | 2 | 2 | 2 | 1500# Weight | 5 | 4 | 4 | 7 | 7 | 7 | ||
| 3/4" | 2 | 2 | 2 | 3 | 3 | 3 | 4 | 3 | 3 | 1500# Weight | 6 | 5 | 6 | 8 | 8 | 8 | ||
| 1" | 3 | 2 | 2 | 4 | 3 | 3 | 4 | 4 | 4 | 1500# Weight | 9 | 8 | 8 | 12 | 11 | 11 | ||
| 1 1/2" | 4 | 3 | 3 | 7 | 6 | 6 | 8 | 7 | 8 | 1500# Weight | 13 | 12 | 13 | 25 | 22 | 23 | ||
| 2" | 6 | 5 | 5 | 9 | 7 | 8 | 12 | 9 | 10 | 1500# Weight | 25 | 25 | 25 | 42 | 37 | 39 | ||
| 2 1/2" | 8 | 7 | 7 | 12 | 10 | 12 | 18 | 13 | 15 | 1500# Weight | 36 | 36 | 35 | 52 | 55 | 56 | ||
| 3" | 10 | 8 | 9 | 15 | 13 | 16 | 23 | 16 | 20 | 31 | 26 | 29 | 48 | 48 | 48 | 94 | 83 | 86 |
| 4" | 15 | 13 | 17 | 25 | 22 | 27 | 42 | 37 | 41 | 53 | 53 | 54 | 73 | 73 | 73 | 145 | 125 | 130 |
| 5" | 19 | 15 | 20 | 32 | 28 | 35 | 68 | 63 | 68 | 86 | 83 | 87 | 130 | 130 | 140 | 245 | 210 | 225 |
| 6" | 24 | 19 | 26 | 42 | 39 | 50 | 81 | 80 | 86 | 110 | 110 | 115 | 165 | 165 | 160 | 380 | 325 | 345 |
| 8" | 39 | 30 | 45 | 67 | 58 | 81 | 120 | 115 | 140 | 175 | 170 | 200 | 275 | 260 | 300 | 580 | 485 | 530 |
| 10" | 52 | 43 | 70 | 91 | 81 | 124 | 190 | 170 | 230 | 260 | 245 | 290 | 455 | 435 | 510 | 1075 | 930 | 1025 |
| 12" | 80 | 64 | 110 | 140 | 115 | 185 | 225 | 200 | 295 | 325 | 325 | 415 | 690 | 580 | 690 | 1525 | 1100 | 1300 |
| 14" | 110 | 90 | 140 | 180 | 165 | 250 | 280 | 230 | 355 | 400 | 400 | 520 | 940 | NA | 975 | NA | NA | NA |
| 16" | 140 | 98 | 180 | 250 | 190 | 295 | 390 | 330 | 495 | 495 | 425 | 600 | 1250 | NA | 1300 | NA | NA | NA |
| 18" | 150 | 130 | 220 | 320 | 250 | 395 | 475 | 400 | 630 | 680 | 600 | 850 | 1625 | NA | 1750 | NA | NA | NA |
| 20" | 180 | 165 | 285 | 400 | 315 | 505 | 590 | 510 | 810 | 830 | 730 | 1075 | 2050 | NA | 2225 | NA | NA | NA |
| 22" | 225 | 185 | 355 | 465 | 370 | 640 | 720 | 590 | 1000 | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| 24" | 260 | 220 | 430 | 580 | 475 | 790 | 830 | 730 | 1250 | 1500 | 1400 | 2025 | 3325 | NA | 3625 | NA | NA | NA |
