Stainless/ Carbon Steel ANSI B16.47 Series B Slip On Flange, Weld Neck and Blind material, view dimensions and Weight Chart In Kilogram
Flanges simplify procedural processes like cleaning, modifying as well as inspection of a piping system. Usually, the performance of tasks like these is tedious because it is not a way to restrict or modify the rate of flow in pipes. By making use of good quality ANSI 16.47 Series B Slip On Flange, it is possible to complete these tasks with much ease. This being said, flanges regulate the flow of media as well. And when used with fittings the ASME B16.47 Series B Flange could change the directional flow of the piping system. Pipes produced in factories are standardised by bodies like ASTM or ANSI. Therefore it is not possible to solely use standardized pipes with flanges. There needs to be a homogeny between both the pipe along with the B16.47 Series B Class 150 Flange used.
Incorrect selection of either pipes, flanges or fittings in a system is dangerous. Apart from not being able to get a proper alignment, these could have leaks and the toxic fluid or gas could be released in the environment. To prevent this most manufacturers produce the B16.47 Series B Blind Flange using standards like the ANSI B16.47. This standard, like the other ANSI standards, relays several important points like the pressure class, size, tolerance, markings and not forgetting the ANSI B16.47 Series B Dimensions as well. Furthermore, the standard also places emphasis on the material used in the manufacture of the ASME B16.47 Series B Reducing Flange.
ASME B16.47 Series B Flange
B16.47 Series B Blind Flange
16.47 Series B Slip On Flange
Series B Reducing Flange Dimensions Chart According to ASME B16.47
Class 150 ASME B16.47 Series B Dimensions
| Normal Pipe Size | OD
(Outer Diameter) |
minimum Thick. [Note1] – WNF
(tf) |
minimum Thick. [Note1] – Blind
(tf) |
Length Through Hub
(Y) |
Hub Diameter Base [Note2]
(X) |
Hub Diameter Top
(A) |
Raised Face Diameter
(R) |
Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | minimum Fillet Radius
(r1) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 26 | 34.25 | 2.63 | 2.63 | 4.69 | 26.62 | 26.00 | 29.50 | 31.75 | 24 | 138 | 114 | 0.38 |
| 28 | 36.50 | 2.75 | 2.75 | 4.88 | 28.62 | 28.00 | 31.50 | 34.00 | 28 | 138 | 114 | 0.44 |
| 30 | 38.75 | 2.88 | 2.88 | 5.32 | 30.75 | 30.00 | 33.75 | 36.00 | 28 | 138 | 114 | 0.44 |
| 32 | 41.75 | 3.13 | 3.13 | 5.63 | 32.75 | 32.00 | 36.00 | 38.50 | 28 | 158 | 112 | 0.44 |
| 34 | 43.75 | 3.19 | 3.19 | 5.82 | 34.75 | 34.00 | 38.00 | 40.50 | 32 | 158 | 112 | 0.50 |
| 36 | 46.00 | 3.50 | 3.50 | 6.13 | 36.75 | 36.00 | 40.25 | 42.75 | 32 | 158 | 112 | 0.50 |
| 38 | 48.75 | 3.38 | 3.38 | 6.13 | 39.00 | 38.00 | 42.25 | 45.25 | 32 | 158 | 112 | 0.50 |
| 40 | 50.75 | 3.50 | 3.50 | 6.38 | 41.00 | 40.00 | 44.25 | 47.25 | 36 | 158 | 112 | 0.50 |
| 42 | 53.00 | 3.75 | 3.75 | 6.69 | 43.00 | 42.00 | 47.00 | 49.50 | 36 | 158 | 112 | 0.50 |
| 44 | 55.25 | 3.94 | 3.94 | 6.94 | 45.00 | 44.00 | 49.00 | 51.75 | 40 | 158 | 112 | 0.50 |
| 46 | 57.25 | 4.00 | 4.00 | 7.25 | 47.12 | 46.00 | 51.00 | 53.75 | 40 | 158 | 112 | 0.50 |
| 48 | 59.50 | 4.19 | 4.19 | 7.50 | 49.12 | 48.00 | 53.50 | 56.00 | 44 | 158 | 112 | 0.50 |
| 50 | 61.75 | 4.32 | 4.32 | 7.94 | 51.25 | 50.00 | 55.50 | 58.25 | 44 | 178 | 134 | 0.50 |
| 52 | 64.00 | 4.50 | 4.50 | 8.19 | 53.25 | 52.00 | 57.50 | 60.50 | 44 | 178 | 134 | 0.50 |
| 54 | 66.25 | 4.69 | 4.69 | 8.44 | 55.25 | 54.00 | 59.50 | 62.75 | 44 | 178 | 134 | 0.50 |
| 56 | 68.75 | 4.82 | 4.82 | 8.94 | 57.38 | 56.00 | 62.00 | 65.00 | 48 | 178 | 134 | 0.50 |
| 58 | 71.00 | 5.00 | 5.00 | 9.19 | 59.38 | 58.00 | 64.00 | 67.25 | 48 | 178 | 134 | 0.50 |
| 60 | 73.00 | 5.13 | 5.13 | 9.38 | 61.38 | 60.00 | 66.00 | 69.25 | 52 | 178 | 134 | 0.50 |
ANSI B16 47 Series B 300# Dimensions
| NPS | OD
(Outside Diameter) |
minimum Thick. [Note1] – WNF
(tf) |
minimum Thick. [Note1] – Blind
(tf) |
Length Through Hub
(Y) |
Hub Dia. Base [Note2]
(X) |
Hub Dia. Top
(A) |
Raised Face Dia.
(R) |
Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | minimum Fillet Radius
(r1) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 26 | 38.25 | 3.07 | 3.25 | 7.19 | 28.38 | 26.00 | 29.50 | 34.50 | 28 | 13⁄4 | 15⁄8 | 0.38 |
| 28 | 40.75 | 3.32 | 3.50 | 7.69 | 30.50 | 28.00 | 31.50 | 37.00 | 28 | 13⁄4 | 15⁄8 | 0.44 |
| 30 | 43.00 | 3.57 | 3.69 | 8.19 | 32.56 | 30.00 | 33.75 | 39.25 | 28 | 17⁄8 | 13⁄4 | 0.44 |
| 32 | 45.25 | 3.82 | 3.88 | 8.69 | 34.69 | 32.00 | 36.00 | 41.50 | 28 | 2 | 17⁄8 | 0.44 |
| 34 | 47.50 | 3.94 | 4.07 | 9.07 | 36.88 | 34.00 | 38.00 | 43.50 | 28 | 2 | 17⁄8 | 0.50 |
| 36 | 50.00 | 4.07 | 4.32 | 9.44 | 39.00 | 36.00 | 40.25 | 46.00 | 32 | 21⁄8 | 2 | 0.50 |
| 38 | 46.00 | 4.19 | 4.19 | 7.06 | 39.12 | 38.00 | 40.50 | 43.00 | 32 | 15⁄8 | 11⁄2 | 0.50 |
| 40 | 48.75 | 4.44 | 4.44 | 7.56 | 41.25 | 40.00 | 42.75 | 45.50 | 32 | 13⁄4 | 15⁄8 | 0.50 |
| 42 | 50.75 | 4.63 | 4.63 | 7.82 | 43.25 | 42.00 | 44.75 | 47.50 | 32 | 13⁄4 | 15⁄8 | 0.50 |
| 44 | 53.25 | 4.82 | 4.82 | 8.06 | 45.25 | 44.00 | 47.00 | 49.75 | 32 | 17⁄8 | 13⁄4 | 0.50 |
| 46 | 55.75 | 5.00 | 5.00 | 8.44 | 47.38 | 46.00 | 49.00 | 52.00 | 28 | 2 | 17⁄8 | 0.50 |
| 48 | 57.75 | 5.19 | 5.19 | 8.75 | 49.38 | 48.00 | 51.25 | 54.00 | 32 | 2 | 17⁄8 | 0.50 |
| 50 | 60.25 | 5.44 | 5.44 | 9.07 | 51.38 | 50.00 | 53.50 | 56.25 | 32 | 21⁄8 | 2 | 0.50 |
| 52 | 62.25 | 5.63 | 5.63 | 9.32 | 53.38 | 52.00 | 55.50 | 58.25 | 32 | 21⁄8 | 2 | 0.50 |
| 54 | 65.25 | 5.94 | 5.94 | 9.88 | 55.50 | 54.00 | 57.75 | 61.00 | 28 | 23⁄8 | 21⁄4 | 0.50 |
| 56 | 67.25 | 6.00 | 6.00 | 10.19 | 57.62 | 56.00 | 59.75 | 63.00 | 28 | 23⁄8 | 21⁄4 | 0.50 |
| 58 | 69.25 | 6.19 | 6.19 | 10.44 | 59.62 | 58.00 | 62.00 | 65.00 | 32 | 23⁄8 | 21⁄4 | 0.50 |
| 60 | 71.25 | 6.38 | 6.38 | 10.69 | 61.62 | 60.00 | 64.00 | 67.00 | 32 | 23⁄8 | 21⁄4 | 0.50 |
ASA B16.47 Series B 600LB Dimensions
| NPS | OD (Outside Diameter) | minimum Thick. [Note1] – WNF (tf) | minimum Thick. [Note1] – Blind (tf) | Length Through Hub (Y) | Hub Dia. Base [Note2] (X) | Hub Dia. Top (A) | Raised Face Dia. (R) | Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | minimum Fillet Radius (r1) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 26 | 40.00 | 4.25 | 4.94 | 8.75 | 29.44 | 26.00 | 29.50 | 36.00 | 28 | 2 | 178 | 0.50 |
| 28 | 42.25 | 4.38 | 5.19 | 9.25 | 31.62 | 28.00 | 31.50 | 38.00 | 28 | 218 | 2 | 0.50 |
| 30 | 44.50 | 4.50 | 5.50 | 9.75 | 33.94 | 30.00 | 33.75 | 40.25 | 28 | 218 | 2 | 0.50 |
| 32 | 47.00 | 4.62 | 5.81 | 10.25 | 36.12 | 32.00 | 36.00 | 42.50 | 28 | 238 | 214 | 0.50 |
| 34 | 49.00 | 4.75 | 6.06 | 10.62 | 38.31 | 34.00 | 38.00 | 44.50 | 28 | 238 | 214 | 0.56 |
| 36 | 51.75 | 4.88 | 6.38 | 11.12 | 40.62 | 36.00 | 40.25 | 47.00 | 28 | 258 | 212 | 0.56 |
| 38 | 50.00 | 6.00 | 6.12 | 10.00 | 40.25 | 38.00 | 41.50 | 45.75 | 28 | 238 | 214 | 0.56 |
| 40 | 52.00 | 6.25 | 6.38 | 10.38 | 42.25 | 40.00 | 43.75 | 47.75 | 32 | 238 | 214 | 0.56 |
| 42 | 55.25 | 6.62 | 6.75 | 11.00 | 44.38 | 42.00 | 46.00 | 50.50 | 28 | 258 | 212 | 0.56 |
| 44 | 57.25 | 6.81 | 7.00 | 11.38 | 46.50 | 44.00 | 48.25 | 52.50 | 32 | 258 | 212 | 0.56 |
| 46 | 59.50 | 7.06 | 7.31 | 11.81 | 48.62 | 46.00 | 50.25 | 54.75 | 32 | 258 | 212 | 0.56 |
| 48 | 62.75 | 7.44 | 7.69 | 12.44 | 50.75 | 48.00 | 52.50 | 57.50 | 32 | 278 | 234 | 0.56 |
| 50 | 65.75 | 7.75 | 8.00 | 12.94 | 52.88 | 50.00 | 54.50 | 60.00 | 28 | 318 | 3 | 0.56 |
| 52 | 67.75 | 8.00 | 8.25 | 13.25 | 54.88 | 52.00 | 56.50 | 62.00 | 32 | 318 | 3 | 0.56 |
| 54 | 70.00 | 8.25 | 8.56 | 13.75 | 57.00 | 54.00 | 58.75 | 64.25 | 32 | 318 | 3 | 0.56 |
| 56 | 73.00 | 8.56 | 8.88 | 14.25 | 59.12 | 56.00 | 60.75 | 66.75 | 32 | 338 | 314 | 0.62 |
| 58 | 75.00 | 8.75 | 9.12 | 14.56 | 61.12 | 58.00 | 63.00 | 68.75 | 32 | 338 | 314 | 0.62 |
| 60 | 78.50 | 9.19 | 9.56 | 15.31 | 63.38 | 60.00 | 65.25 | 71.75 | 28 | 358 | 312 | 0.69 |
ASME B16.47 Series B (Mss Sp-44) Class 900 Dimensions with Tolerances
| NPS | OD (Outside Diameter) | minimum Thick. [Note1] – WNF (tf) | minimum Thick. [Note1] – Blind (tf) | Length Through Hub (Y) | Hub Dia. Base [Note2] (X) | Hub Dia. Top (A) | Raised Face Dia. (R) | Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | minimum Fillet Radius (r1) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 26 | 42.75 | 5.50 | 6.31 | 11.25 | 30.50 | 26.00 | 29.50 | 37.50 | 20 | 278 | 234 | 0.44 |
| 28 | 46.00 | 5.62 | 6.75 | 11.75 | 32.75 | 28.00 | 31.50 | 40.25 | 20 | 318 | 3 | 0.50 |
| 30 | 48.50 | 5.88 | 7.18 | 12.25 | 35.00 | 30.00 | 33.75 | 42.75 | 20 | 318 | 3 | 0.50 |
| 32 | 51.75 | 6.25 | 7.62 | 13.00 | 37.25 | 32.00 | 36.00 | 45.50 | 20 | 338 | 314 | 0.50 |
| 34 | 55.00 | 6.50 | 8.06 | 13.75 | 39.62 | 34.00 | 38.00 | 48.25 | 20 | 358 | 312 | 0.56 |
| 36 | 57.50 | 6.75 | 8.44 | 14.25 | 41.88 | 36.00 | 40.25 | 50.75 | 20 | 358 | 312 | 0.56 |
| 38 | 57.50 | 7.50 | 8.50 | 13.88 | 42.25 | 38.00 | 43.25 | 50.75 | 20 | 358 | 312 | 0.75 |
| 40 | 59.50 | 7.75 | 8.81 | 14.31 | 44.38 | 40.00 | 45.75 | 52.75 | 24 | 358 | 312 | 0.81 |
| 42 | 61.50 | 8.12 | 9.12 | 14.62 | 46.31 | 42.00 | 47.75 | 54.75 | 24 | 358 | 312 | 0.81 |
| 44 | 64.88 | 8.44 | 9.56 | 15.38 | 48.62 | 44.00 | 50.00 | 57.62 | 24 | 378 | 334 | 0.88 |
| 46 | 68.25 | 8.88 | 10.06 | 16.18 | 50.88 | 46.00 | 52.50 | 60.50 | 24 | 418 | 4 | 0.88 |
| 48 | 70.25 | 9.19 | 10.38 | 16.50 | 52.88 | 48.00 | 54.50 | 62.50 | 24 | 41⁄8 | 4 | 0.94 |
MSS SP-44 A182 F316L B16.47 Series B Class 150 Flange Specification, IBR Approved B16 47 Flange B16.47 Series B Manufacturer In India, View Mild Steel Series B Reducing Flange At Lower Prices Compared To USA & UAE.
B16.47 Series B Blind Flange Specification
| Size | ½” (15 NB) to 48″ (1200NB) |
| Type | Spade Flange and Ring Spacer Flange |
| Specialize | As per drawing |
| Coating/Surface Treatment | Zinc Plated, Oil Black Paint, Anti-rust Paint, Cold and Hot Dip Galvanized, Yellow Transparent |
| Connection Type | Ring Type Joint, Lap-Joint Face, Raised Face, Small Male-Female, Large, Flat Face, Large Male-Female, |
| Dimensions | ASA, API-605, ANSI B16.5, MSS SP44, AWWA, ANSI B16.47 Series A & B, Custom Drawings |
| Standard | BS 4504, EN1092, ANSI B16.36, DIN, JIS, SABS1123, ANSI B16.48, ANSI B16.47, ANSI B16.5, GOST-12820, UNI 2277/2278 |
| Class | 300 LBS, 600 LBS, 2500 LBS, 900 LBS, 150 LBS, 1500 LBS |
| DIN | DIN2576, DIN2656, DIN2655, DIN2633, DIN2673, DIN2641, DIN2642, DIN2527, DIN2566, DIN 2631, DIN2632, DIN2635, DIN2573, DIN2634, DIN2636,DIN2637, DIN2638, DIN2627, DIN2628, DIN2629 |
| BS | BS4504, BS10, BS4504, BS1560 |
| In Form | WNRF, BLRF, Threaded, SORF, Spectacle, SWRF, LAP Joint, Reducing, etc |
| Usage | Offshore, Water System, Electric Power, Oil Field, Pipe Projects, Shipbuilding, Natural Gas etc. |
Check Aluminium Series B blind flange Available in a wide range of Hastelloy B16.47 Series B Flange grades and ANSI B16.47 Series B Slip On Flange Shapes.
Available MSS SP-44 A182 F316L Series B Types
ASME B16.47 Series B Flanges
ANSI B16.47 Series B Blind Flanges
ASME B16.47 Series B 300 Lb Flangess
ASME 16.47 Series B Slip On Flanges
MSS SP-44 A182 F316L B16.47 Series B Class 150 Flanges
ANSI B16 47 Flange B16.47 Series B
ASME B16.47 Series B blind flanges
ANSI B16.47 Series B Slip On Flanges
Best deals on bulk procurement of ASME B16.47 Series B Flange for connection Of Raised Face, Oldest Inconel B16.47 Series B Rtj Flange Manufacturer in India, Reliable B16.47 Series B Supplier, One Stop Shop For All ASME B16.47 Series B 300 Lb Flanges.
16.47 Series B Slip On Flange Pressure Chart
|
Temperature |
||||||||
|
Flanges Tables |
-10° |
250° |
300° |
350° |
400° |
425° |
450° |
475° |
|
6 |
6 |
5.5 |
5 |
– |
– |
– |
– |
– |
|
10 |
10 |
9 |
8 |
7 |
6 |
– |
– |
– |
|
16 |
16 |
15 |
13 |
11 |
9 |
– |
– |
– |
|
25 |
25 |
24 |
21 |
17 |
14 |
12 |
9 |
6 |
|
40 |
40 |
38 |
33 |
28 |
23 |
20 |
15 |
10 |
|
64 |
64 |
61 |
53 |
44 |
36 |
32 |
24 |
16 |
|
100 |
100 |
95 |
83 |
70 |
57 |
50 |
37 |
25 |
|
160 |
160 |
152 |
132 |
112 |
92 |
80 |
60 |
40 |
Check Difference Between Stainless Steel B16.47 Series A And Series B Flanges, Stockist Of Series B Flange in Mumbai, Super Duplex B16.47 Series B Flange Manufacturer in India. Check ASME B16.47 Series B Material Pressure Ratings.
B16.47 Series B Reducing Flange Minimum Weight
| Normal Pipe Size | Dimensions | Weight (Kilogram) | ||||
|---|---|---|---|---|---|---|
| NPS (In.) |
DN (millimeter) | FLANGE Outer Diameter Millimeter Millimeter |
FLANGE Thickness D millimeter |
SOW Socket Weld |
Weld Neck | Blind |
| 1/2 | 15 | 88.9 | 11.2 | 0.4 | 0.5 | 0.4 |
| 3/4 | 20 | 98.6 | 12.7 | 0.6 | 0.7 | 0.6 |
| 1 | 25 | 108 | 14.2 | 0.8 | 1 | 0.9 |
| 1 1/4 | 32 | 117.3 | 15.7 | 1 | 1.3 | 1.2 |
| 1 1/2 | 40 | 127 | 17.5 | 1.3 | 1.7 | 1.5 |
| 2 | 50 | 152.4 | 19.1 | 2.1 | 2.6 | 2.4 |
| 2 1/2 | 65 | 177.8 | 22.4 | 3.3 | 4.1 | 3.9 |
| 3 | 80 | 190.5 | 23.9 | 3.9 | 4.9 | 4.9 |
| 3 1/2 | 90 | 215.9 | 23.9 | 4.8 | 6.1 | 6.2 |
| 4 | 100 | 228.6 | 23.9 | 5.3 | 6.8 | 7.0 |
| 5 | 125 | 254 | 23.9 | 6.1 | 8.6 | 8.6 |
| 6 | 150 | 279.4 | 25.4 | 7.5 | 10.6 | 11.3 |
| 8 | 200 | 342.9 | 28.4 | 12.1 | 17.6 | 19.6 |
| 10 | 250 | 406.4 | 30.2 | 16.5 | 24 | 28.6 |
| 12 | 300 | 482.6 | 31.8 | 26.2 | 36.5 | 43.2 |
| 14 | 350 | 533.4 | 35.1 | 34.6 | 48.4 | 58.1 |
| 16 | 400 | 596.9 | 36.6 | 44.8 | 60.6 | 76.1 |
| 18 | 450 | 635 | 39.6 | 48.9 | 68.3 | 93.7 |
| 20 | 500 | 698.5 | 42.9 | 61.9 | 84.5 | 122.0 |
| 24 | 600 | 812.8 | 47.8 | 86.9 | 115 | 185.0 |
