Stainless Steel Slip On Flange and 304/316 SORF Flange manufacturer

ANSI B16.5 Cl 150/300/ 1500# and Class 900 Slip On Flanges manufacturer in India, view En 1092-1 Carbon Steel Sorf Flange specification and pressure rating

Today, both manufacturers and buyers across the world have a choice to use fittings, pipes and flanges of different standards. From ASME to ASTM, applications world over have begun to accept flanges produced from Carbon Steel Slip On Flange Weight Chart. Generally the pressure rating for some applications could be as low as 150, while some Mild Steel Slip On Flange Pressure Ratinge could be as high as class 2500. Though the pressure rating is chosen on the basis of the industry and application it is to be used for. In addition to pressure ratings and MSS SP-44 SORF Flange Dimensions, the selection of material plays a very important role as well. Materials for flanges are either cast or they may be forged. Using forged products gives the buyer an advantage over the rest.

First, the EN 1092-2 Forged Steel Slip On Flanges notice an improvement over their wear resistance properties. Next, their impact resistance improves as well. And lastly, because the grain flow of the ANSI B16.5 Stainless Steel Slip On Flange gets aligned to it's form, the end result is a smoother surface. The mechanical properties also see an overall improvement in the forged ASME B16.5 Slip On Flange.

ASME B16.5 Slip On Flange

En 1092-1 Stainless Steel Slip On Flange

ASTM A105 Carbon Steel SORF Flange

Stainless Steel Slip On Flange Specifications

Specification :	ASME B16.5 Slip On Flange
Manufacturing Shapes	Ring Type Joint, Flat Face, Raised Face, Lap-Joint Face, Small Tongue, Large Tongue & Groove, Large Male-Female, Groove, Small Male-Female
Pressure Rating ANSI	600 LBS, 2500 LBS 900 LBS, 1500 LBS, Class 150 LBS, 300 LBS
Production technique	Heat treated, Forged and machined
Size Chart	1/2" to 48"
Standards	MSS S44, ISO70051, EN-1092, DIN, ANSI, ASME/ANSI B16.5/16.36/16.47A/16.47B, BS1560-3.1, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, API7S-15, EN1092, API7S-43, API605, BS4504
EN Standards	40Bar 25Bar 10Bar 16Bar 6Bar
Most common types	Threaded / Forged / Plate /Screwed
Japanese Standards	16 K 20 K, 5K, 10 K, 40 K, 30 K, 63 K
UNI Standards	25Bar 6Bar 40Bar 10Bar 16Bar

CS SORF Flanges A105 manufacturers in India, Offer A Huge Selection Of MSS SP-44 Slip-On Pipe Flanges, Visit Our 2 Inch To 10 Inch Alloy Steel Forged Steel Slip On Flanges Mill in Mumbai.

BS4504 Pn16 Slip On Flanges Dimensions Table

Refer Din Pn10 Slip On Flange Dimensions 150# And ANSI B16.5 Class 300 Slip-On Flanges Dimensions Chart, Pressure Ratings Of Bs10 Table E Slip On Flange.

ASA 150 SORF Flange Dimensions Chart

FLANGE NPS	I. D.	O. D.	Bolt Circle (BC)	RF (R)	RF (RF)	H	RF Thick. (T)	T1	FF Thick. (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2	0.88	3.50	2.38	1.38	.063	1.19	.62	.38	.56	.62	4
3/4	1.09	3.88	2.75	1.69	.063	1.50	.62	.44	.56	.62	4
1	1.36	4.25	3.12	2.00	.063	1.94	.69	.50	.63	.62	4
1-1/4	1.70	4.62	3.50	2.50	.063	2.31	.81	.56	.75	.62	4
1-1/2	1.97	5.00	3.88	2.88	.063	2.56	.88	.62	.82	.62	4
2	2.44	6.00	4.75	3.62	.063	3.06	1.00	.69	.94	.75	4
2-1/2	2.94	7.00	5.50	4.12	.063	3.56	1.12	.82	1.06	.75	4
3	3.57	7.50	6.00	5.00	.063	4.25	1.19	.88	1.13	.75	4
3-1/2	4.07	8.50	7.00	5.50	.063	4.81	1.25	.88	1.19	.75	8
4	4.57	9.00	7.50	6.19	.063	5.31	1.31	.88	1.25	.75	8
5	5.66	10.00	8.50	7.31	.063	6.44	1.44	.88	1.38	.88	8
6	6.72	11.00	9.50	8.50	.063	7.56	1.56	.94	1.50	.88	8
8	8.72	13.50	11.75	10.62	.063	9.69	1.75	1.06	1.69	.88	8
10	10.88	16.00	14.25	12.75	.063	12.00	1.94	1.13	1.88	1.00	12
12	12.88	19.00	17.00	15.00	.063	14.38	2.19	1.19	2.13	1.00	12
14	14.14	21.00	18.75	16.25	.063	15.75	2.25	1.32	2.19	1.12	12
16	16.16	23.50	21.25	18.50	.063	18.00	2.50	1.38	2.44	1.12	16
18	18.18	25.00	22.75	21.00	.063	19.88	2.69	1.50	2.63	1.25	16
20	20.20	27.50	25.00	23.00	.063	22.00	2.88	1.63	2.83	1.25	20
22	22.22	29.50	27.25	25.25	.063	24.25	3.13	1.75	3.07	1.38	20
24	24.25	32.00	29.50	27.25	.063	26.12	3.25	1.82	3.19	1.38	20

300 Lb Stainless Steel Slip On Flange Dimensions

FLANGS NPS	I. D.	O. D.	Bolt Circle (BC)	RF (R)	RF (RF)	H	RF Thick. (T)	T1	FF Thick. (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2	0.88	3.75	2.62	1.38	.063	1.50	0.88	0.50	0.82	0.62	4
3/4	1.09	4.62	3.25	1.69	.063	1.88	1.00	.056	0.94	0.75	4
1	1.36	4.88	3.50	2.00	.063	2.12	1.06	0.63	1.00	0.75	4
1-1/4	1.70	5.25	3.88	2.50	.063	2.50	1.06	0.69	1.00	0.75	4
1-1/2	1.95	6.12	4.50	2.88	.063	2.75	1.19	0.75	1.13	0.88	4
2	2.44	6.50	5.00	3.62	.063	3.31	1.31	0.82	1.25	0.75	8
2-1/2	2.94	7.50	5.88	4.12	.063	3.94	1.50	0.94	1.44	0.88	8
3	3.57	8.25	6.62	5.00	.063	4.62	1.69	1.06	1.63	0.88	8
3-1/2	4.07	9.00	7.25	5.50	.063	5.25	1.75	1.13	1.69	0.88	8
4	4.57	10.00	7.88	6.19	.063	5.75	1.88	1.19	1.82	0.88	8
5	5.66	11.00	9.25	7.31	.063	7.00	2.00	1.32	1.94	0.88	8
6	6.72	12.50	10.62	8.50	.063	8.12	2.06	1.38	2.00	0.88	12
8	8.72	15.00	13.00	10.62	.063	10.25	2.44	1.56	2.38	1.00	12
10	10.88	17.50	15.25	12.75	.063	12.62	2.62	1.82	2.56	1.12	16
12	12.88	20.50	17.75	15.00	.063	14.75	2.88	1.94	2.82	1.25	16
14	14.14	23.00	20.25	16.25	.063	16.75	3.00	2.06	2.94	1.25	20
16	16.16	25.50	22.50	18.50	.063	19.00	3.25	2.19	3.19	1.38	20
18	18.18	28.00	24.75	21.00	.063	21.00	3.50	2.32	3.44	1.38	24
20	20.20	30.50	27.00	23.00	.063	23.12	3.75	2.44	3.69	1.38	24
22	22.22	33.00	29.25	25.25	.063	25.25	4.00	2.57	3.94	1.63	24
24	24.25	36.00	32.00	27.25	.063	27.62	4.19	2.69	4.13	1.62	24

Reducing Slip On Flange Pressure Rating

ASME B16.5 Slip On Flange Pressure With Weight and Size
NPS	150#			300#			600#			900#			1500#			2500#
NPS	Weld Neck	SORF	BLRF	Weld Neck	SORF	BLRF	Weld Neck	SORF	BLRF	Weld Neck	SORF	BLRF	Weld Neck	SORF	BLRF	Weld Neck	SORF	BLRF
1/2"	2	1	1	2	1	1	2	2	2	1500LB WEIGHTS			5	4	4	7	7	7
3/4"	2	2	2	3	3	3	4	3	3	1500LB WEIGHTS			6	5	6	8	8	8
1"	3	2	2	4	3	3	4	4	4	1500LB WEIGHTS			9	8	8	12	11	11
1 1/2"	4	3	3	7	6	6	8	7	8	1500LB WEIGHTS			13	12	13	25	22	23
2"	6	5	5	9	7	8	12	9	10	1500LB WEIGHTS			25	25	25	42	37	39
2 1/2"	8	7	7	12	10	12	18	13	15	1500LB WEIGHTS			36	36	35	52	55	56
3"	10	8	9	15	13	16	23	16	20	31	26	29	48	48	48	94	83	86
4"	15	13	17	25	22	27	42	37	41	53	53	54	73	73	73	145	125	130
5"	19	15	20	32	28	35	68	63	68	86	83	87	130	130	140	245	210	225
6"	24	19	26	42	39	50	81	80	86	110	110	115	165	165	160	380	325	345
8"	39	30	45	67	58	81	120	115	140	175	170	200	275	260	300	580	485	530
10"	52	43	70	91	81	124	190	170	230	260	245	290	455	435	510	1075	930	1025
12"	80	64	110	140	115	185	225	200	295	325	325	415	690	580	690	1525	1100	1300
14"	110	90	140	180	165	250	280	230	355	400	400	520	940	NA	975	NA	NA	NA
16"	140	98	180	250	190	295	390	330	495	495	425	600	1250	NA	1300	NA	NA	NA
18"	150	130	220	320	250	395	475	400	630	680	600	850	1625	NA	1750	NA	NA	NA
20"	180	165	285	400	315	505	590	510	810	830	730	1075	2050	NA	2225	NA	NA	NA
22"	225	185	355	465	370	640	720	590	1000	NA	NA	NA	NA	NA	NA	NA	NA	NA
24"	260	220	430	580	475	790	830	730	1250	1500	1400	2025	3325	NA	3625	NA	NA	NA

Carbon Steel 600# Slip On Flange Dimensions

FLANGE NPS	I. D.	O. D.	Bolt Circle (BC)	RF (R)	RF (RF)	H	RF Thickness (T)	T1	FF Thick. (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2	0.88	3.75	2.62	1.38	.250	1.50	1.13	0.56	0.88	0.62	4
3/4	1.09	4.62	3.25	1.69	.250	1.88	1.25	0.62	1.00	0.75	4
1	1.36	4.88	3.50	2.00	.250	2.12	1.31	0.69	1.06	0.75	4
1-1/4	1.7	5.25	3.88	2.50	.250	2.50	1.37	0.81	1.12	0.75	4
1-1/2	1.95	6.12	4.50	2.88	.250	2.75	1.50	0.88	1.25	0.88	4
2	2.44	6.50	5.00	3.62	.250	3.31	1.69	1.00	1.44	0.75	8
2-1/2	2.94	7.50	5.88	4.12	.250	3.94	1.87	1.12	1.62	0.88	8
3	3.57	8.25	6.62	5.00	.250	4.62	2.06	1.25	1.81	0.88	8
3-1/2	4.07	9.00	7.25	5.50	.250	5.25	2.19	1.38	1.94	1.00	8
4	4.57	10.75	8.50	6.19	.250	6.00	2.37	1.5	2.12	1.00	8
5	5.66	13.00	10.50	7.31	.250	7.44	2.63	1.75	2.38	1.12	8
6	6.72	14.00	11.50	8.50	.250	8.75	2.87	1.88	2.62	1.12	12
8	8.72	16.50	13.75	10.62	.250	10.75	3.25	2.19	3.00	1.25	12
10	10.88	20.00	17.00	12.75	.250	13.5	3.63	2.50	3.38	1.38	16
12	12.88	22.00	19.25	15.00	.250	15.75	3.87	2.62	3.62	1.38	20
14	14.14	23.75	20.75	16.25	.250	17.00	3.94	2.75	3.69	1.50	20
16	16.16	27.00	23.75	18.50	.250	19.50	4.44	3.00	4.19	1.62	20
18	18.18	29.25	25.75	21.00	.250	21.50	4.87	3.25	4.62	1.75	20
20	20.20	32.00	28.50	23.00	.250	24.00	5.25	3.50	5.00	1.75	24
22	22.22	34.25	30.63	25.25	.250	26.25	5.50	3.75	5.25	1.75	24
24	24.25	37.00	33.00	27.25	.250	28.25	5.75	4.00	5.50	2.00	24

Alloy Steel Class 900 Slip On Flange Dimensions

FLANGE NPS	I. D.	O. D.	Bolt Circle (BC)	RF (R)	RF (RF)	H	RF Thick. (T)	T1	FF Thick. (T2)	Bolt Hole (B)	No. of Bolt Holes
3	3.57	9.50	7.50	5.00	.250	5.00	2.38	1.50	2.13	1.00	8
4	4.57	11.50	9.25	6.19	.250	6.25	3.00	1.75	2.75	1.25	8
5	5.66	13.75	11.00	7.31	.250	7.50	3.38	3.00	3.13	1.38	8
6	6.72	15.00	12.50	8.50	.250	9.25	3.63	2.19	3.38	1.25	12
8	8.72	18.50	15.50	10.63	.250	11.75	4.25	2.50	4.00	1.50	12
10	10.88	21.50	18.50	12.75	.250	14.50	4.50	2.75	4.25	1.50	16
12	12.88	24.00	21.00	15.00	.250	16.50	4.88	3.13	4.63	1.50	20
14	14.14	25.25	22.00	16.25	.250	17.75	5.38	3.38	5.13	1.63	20
16	16.16	27.75	24.25	18.50	.250	20.00	5.50	3.50	5.25	1.75	20
18	18.18	31.00	27.00	21.00	.250	22.25	6.25	4.00	6.00	2.00	20
20	20.20	33.75	29.50	23.00	.250	24.50	6.50	4.25	6.25	2.13	20
24	24.25	41.00	35.50	27.25	.250	29.50	8.25	5.50	8.00	2.63	20

Raised Faced 1500 Lb Slip On Flange Dimensions

FLANGE NPS	I. D.	OD	Bolt Circle (BC)	RF (R)	RF (RF)	H	RF Thick. (T)	T1	FF Thick. (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2	0.88	4.75	3.25	1.38	.250	1.50	1.50	0.88	1.25	0.88	4
3/4	1.09	5.13	3.50	1.69	.250	1.75	1.63	1.00	1.38	0.88	4
1	1.36	5.88	4.00	2.00	.250	2.06	1.88	1.13	1.63	1.00	4
1-1/4	1.70	6.25	4.38	2.50	.250	2.50	1.88	1.13	1.63	1.00	4
1-1/2	1.95	7.00	4.88	2.88	.250	2.75	2.00	1.25	1.75	1.13	4
2	2.44	8.50	6.50	3.63	.250	4.13	2.50	1.50	2.25	1.00	8
2-1/2	2.94	9.63	7.50	4.13	.250	4.88	2.75	1.63	2.50	1.13	8
3 **	3.57	10.50	8.00	5.00	.250	5.25	3.13	1.88	2.88	1.25	8
4 **	4.57	12.25	9.50	6.19	.250	6.38	3.81	2.13	3.56	1.38	8
5 **	5.66	14.75	11.50	7.31	.250	7.75	4.38	2.88	4.13	1.63	8
6 **	6.72	15.50	12.50	8.50	.250	9.00	4.94	3.25	4.69	1.50	12
8 **	8.72	19.00	15.50	10.63	.250	11.50	5.88	3.63	5.63	1.75	12
10 **	10.88	23.00	19.00	12.75	.250	14.50	6.50	4.25	6.25	2.00	12
12 **	12.88	26.50	22.50	15.00	.250	17.75	7.38	4.88	7.13	2.13	16

Reliable Supplier Of Pn25 Mild Steel Slip On Flange In India, Get Instant Delivery of Jis 5k Flange Steel Welding Slip On, Call Now To Get Bs4504 Pn16 Slip On Flange.

ANSI B16.5 2500 Slip On Flange Dimensions

FLANGE NPS	I. D.	O. D.	Bolt Circle (BC)	RF (R)	RF (RF)	H	RF Thick. (T)	T1	FF Thick. (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2	0.88	5.25	3.50	1.38	.250	1.69	1.81	1.19	1.56	0.88	4
3/4	1.09	5.50	3.75	1.69	.250	2.00	1.94	1.25	1.69	0.88	4
1	1.36	6.25	4.25	2.00	.250	2.25	2.13	1.38	1.88	1.00	4
1-1/4	1.70	7.25	5.13	2.50	.250	2.88	2.31	1.50	2.06	1.13	4
1-1/2	1.95	8.00	5.75	2.88	.250	3.13	2.63	1.75	2.38	1.25	4
2	2.44	9.25	6.75	3.63	.250	3.75	3.00	2.00	2.75	1.13	8
2-1/2	2.94	10.50	7.75	4.13	.250	4.50	3.38	2.25	3.13	1.25	8
3	3.57	12.00	9.00	5.00	.250	5.25	3.88	2.63	3.63	1.38	8
4	4.57	14.00	10.75	6.19	.250	6.50	4.50	3.00	4.25	1.63	8
5	5.66	16.50	12.75	7.31	.250	8.00	5.38	3.63	5.13	1.88	8
6	6.72	19.00	14.50	8.50	.250	9.25	6.25	4.25	6.00	2.13	8
8	8.72	21.75	17.25	10.63	.250	12.00	7.25	5.00	7.00	2.13	12
10	10.88	26.50	21.25	12.75	.250	14.75	9.25	6.50	9.00	2.63	12
12	12.88	30.00	24.38	15.00	.250	17.38	10.25	7.25	10.00	2.88	12

Different Type Of ASTM A105 Slip On Flange

4 Inch, 300LB, ASTM A105, EN1092-1 Carbon Steel Slip-On Flanges

6 Inch, ASME B16.5, DN 450, PN 20, RF, Weldable Slip-on Flange

8 Inch, 150 LB, BS 4504, OD 2876.55mm x ID2514.6mm Slip On Raised Face Flange

ASTM A182 F316L, DN300, PN20, RF, ASME B16.5 Slip Blind Flange

ASTM A105, DN1000, Raised Face, BS 3293, PN20, Reducing Slip On Flange

ASTM A105, BS 3293, RF, PN20, DN900 Slip On Flat Face Flange

24 Inch, 300#, DN300, Class D, F304L, STD Bore, AWWA Flange Slip On Ansi 150

10 Inch, Class 150, ASTM A350 LF2, RF, JIS B2313, PN25, Slip On Plate Flange

2500LB, ASTM A516 Gr 60, 900LB Rf Slip On Flange

3 Inch, Class 300, ASTM A694 Carbon Steel Flange Ansi 150 Slip On

BS 3293, RF, PN20, 150#, SCH 40, Slip Joint Flange

DN300, RF, PN20, SA516 Grade 70 Custom Flange Slip On 150 Lbs

1-1/4 inch 300# SCH40s Flange Steel Welding Slip On

8 inch 900# SCH 80 Carbon Steel Flat Face SORF Flange

12 inch 600# Slip On Flange PN50, DN80

1-1/4 x 3/4 inch 900# SCH 120 ASTM A105, DN300, PN20, RF Slip On Exhaust Flange

1-1/2 inch SCH 20 400# RF Slip On Rtj Flange

1-1/4 x 1/2 inch SCH 180 1500# Slip On Threaded Flange

1-1/2 inch SCH120 2500# 304L DN 150, PN 20 Slip On Boss Flange

ASTM A105, SCH 160 Carbon Steel SORF Flange, DN300, PN20, RF

Buy ASME B16.5 Sorf Plate Flanges Material With Best Price & Fast Delivery, Schedule Chart Of Din Raised Face Slip On Flange, ASME B16.5 Slip On Flange manufacturers in India.

Forged Steel Slip On Flanges Schedule Chart

Normal Pipe Size		Dimensions		Weight (Kilogram)
NPS (In.)	DN (MM)	FLANGES O.D. Millimeter Millimeter	FLANGE THICK. D MM	SOW SW	WELD NECK	BLRF
1/2	15	88.9	11.2	0.4	0.5	0.4
3/4	20	98.6	12.7	0.6	0.7	0.6
1	25	108	14.2	0.8	1	0.9
1 1/4	32	117.3	15.7	1	1.3	1.2
1 1/2	40	127	17.5	1.3	1.7	1.5
2	50	152.4	19.1	2.1	2.6	2.4
2 1/2	65	177.8	22.4	3.3	4.1	3.9
3	80	190.5	23.9	3.9	4.9	4.9
3 1/2	90	215.9	23.9	4.8	6.1	6.2
4	100	228.6	23.9	5.3	6.8	7.0
5	125	254	23.9	6.1	8.6	8.6
6	150	279.4	25.4	7.5	10.6	11.3
8	200	342.9	28.4	12.1	17.6	19.6
10	250	406.4	30.2	16.5	24	28.6
12	300	482.6	31.8	26.2	36.5	43.2
14	350	533.4	35.1	34.6	48.4	58.1
16	400	596.9	36.6	44.8	60.6	76.1
18	450	635	39.6	48.9	68.3	93.7
20	500	698.5	42.9	61.9	84.5	122.0
24	600	812.8	47.8	86.9	115	185.0

Stainless Steel Slip On Flange