Industrial Pipe Flange

ANSI B16.5 Weld Neck Flange in Carbon and Stainless Steel

Get Instant Delivery of BS4504 Carbon Steel WNRF Flange In India, Visit Our ANSI B16.5 Stainless Steel Weld Neck Flange Mill in Mumbai.


The production of a flange requires metals or alloys that are machinable. In addition, to having these properties, manufactures need to have a certain level of ductility to produce the ANSI B16.5 WNRF Flange Dimensions. Hence materials like stainless steel or nickel-based alloys are selected for their manufacture. In particular, Stainless Steel Weld Neck Flange are economical and offer great corrosion resistance properties. Yet, buyers may require some components that lower the cost of the overall application. In times like these, the use of an ASME B16.5 Carbon Steel Weld Neck Flange gives the buyer savings.

However, in terms of its corrosion resistance, the properties remain nullified as lesser elements to alloy would mean that there is no form of resistance against any type of corrosion. But if the buyer were to use an Alloy Steel 150 Welding Neck Flange, there could be some form of inherent corrosion properties, due to the presence of elements. Although carbon steel could be coated or galvanised to achieve minimal resistance. The ASME B16.5 Weld Neck Flange Pressure Rating could be anywhere between class 150 to class 2500.

ASME B16.5 Weld Neck Flange

ASME B16.5 Weld Neck Flange

Stainless Steel Weld Neck Flange

Stainless Steel Weld Neck Flange

ASTM A105 Carbon Steel WNRF Flange

ASTM A105 Carbon Steel WNRF Flange




Compare Prices Before You Buy Table D Long Welding Neck Flanges, EN 1092 Weld Neck Pipe Flanges Manufacturers In India, PN16 WNRF Blind Flange Material Specification.


Socket Weld Pipe Flanges Specification Format

Specification : ASME B16.5 Weld Neck Flange
Size Chart 1/2" to 48"
Japanese Standards 16 K 20 K, 5K, 10 K, 40 K, 30 K, 63 K
Pressure Rating ANSI 600 LBS, 2500 LBS 900 LBS, 1500 LBS, Class 150 LBS, 300 LBS
Production technique
  • Heat treated, Forged and machined
Standards MSS S44, ISO70051, EN-1092, DIN, ANSI, ASME/ANSI B16.5/16.36/16.47A/16.47B, BS1560-3.1, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, API7S-15, EN1092, API7S-43, API605, BS4504
EN Standards 40Bar 25Bar 10Bar 16Bar 6Bar
UNI Standards 25Bar 6Bar 40Bar 10Bar 16Bar
Manufacturing Shapes Ring Type Joint, Flat Face, Raised Face, Lap-Joint Face, Small Tongue, Large Tongue & Groove, Large Male-Female, Groove, Small Male-Female
Most common types Threaded / Forged / Plate /Screwed

View schedule 80 WNRF Flange Class 150 And Alloy Steel Weld Neck Flange Dimensions Class 300 & ASTM 182 SS Welding Neck Flange 600 Lbs Dimensions, Accept All Small/ Large Orders of JIS 16k Weld Neck Threaded Flange.


Weld Neck Flange Dimensions ASME B16.5

Weld Neck Flange Dimensions ASME B16.5

Sch 40 WNRF Flange Class 150 Dimensions

Size in Inch Size in Millimeter (OD) Flange Thick. Hub OD Weld Neck OD Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 90 9.6 30 21.3 46 Refer Note 34.9 2 60.3 1.6
3/4 20 100 11.2 38 26.7 51 42.9 2 69.9 1.6
1 25 110 12.7 49 33.4 54 50.8 2 79.4 1.6
1 1/4 32 115 14.3 59 42.2 56 63.5 2 88.9 1.6
1 1/2 40 125 15.9 65 48.3 60 73 2 98.4 1.6
2 50 150 17.5 78 60.3 62 92.1 2 120.7 1.6
2 1/2 65 180 20.7 90 73 68 104.8 2 139.7 1.6
3 80 190 22.3 108 88.9 68 127 2 152.4 1.6
3 1/2 90 215 22.3 122 101.6 70 139.7 2 177.8 1.6
4 100 230 22.3 135 114.3 75 157.2 2 190.5 1.6
5 125 255 22.3 164 141.3 87 185.7 2 215.9 1.6
6 150 280 23.9 192 168.3 87 215.9 2 241.3 1.6
8 200 345 27 246 219.1 100 269.9 2 298.5 1.6
10 250 405 28.6 305 273 100 323.8 2 362 1.6
12 300 485 30.2 365 323.8 113 381 2 431.8 1.6
14 350 535 33.4 400 355.6 125 412.8 2 476.3 1.6
16 400 595 35 457 406.4 125 469.9 2 539.8 1.6
18 450 635 38.1 505 457.2 138 533.4 2 577.9 1.6
20 500 700 41.3 559 508 143 584.2 2 635 1.6
24 600 815 46.1 663 610 151 692.2 2 749.3 1.6

300 Lbs Welding Neck Flange Dimensions Table


Size in In Size in Millimeter (OD) Outer Diameter Flange Thick. Hub OD Weld Neck Outer Diameter Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 95 12.7 38 21.3 51 Refer Note 34.9 2 66.7 1.6
3/4 20 115 14.3 48 26.7 56 42.9 2 82.6 1.6
1 25 125 15.9 54 33.4 60 50.8 2 88.9 1.6
1 1/4 32 135 17.5 64 42.2 64 63.5 2 98.4 1.6
1 1/2 40 155 19.1 70 48.3 67 73 2 114.3 1.6
2 50 165 20.7 84 60.3 68 92.1 2 127 1.6
2 1/2 65 190 23.9 100 73 75 104.8 2 149.2 1.6
3 80 210 27 117 88.9 78 127 2 168.3 1.6
3 1/2 90 230 28.6 133 101.6 79 139.7 2 184.2 1.6
4 100 255 30.2 146 114.3 84 157.2 2 200 1.6
5 125 280 33.4 178 141.3 97 185.7 2 235 1.6
6 150 320 35 206 168.3 97 215.9 2 269.9 1.6
8 200 380 39.7 260 219.1 110 269.9 2 330.2 1.6
10 250 445 46.1 321 273 116 323.8 2 387.4 1.6
12 300 520 49.3 375 323.8 129 381 2 450.8 1.6
14 350 585 52.4 425 355.6 141 412.8 2 514.4 1.6
16 400 650 55.6 483 406.4 144 469.9 2 571.5 1.6
18 450 710 58.8 533 457 157 533.4 2 628.6 1.6
20 500 775 62 587 508 160 584.2 2 685.8 1.6
24 600 915 68.3 702 610 167 692.2 2 812.8 1.6


Sch 80 600# Weld Neck Flange Dimensions

Size in In. Size in Millimeter (OD) Flange Thick. Hub O.D. Weld Neck O.D. Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 95 14.3 38 21.3 52 Refer Note 34.9 7 66.7 1.6
3/4 20 115 15.9 48 26.7 57 42.9 7 82.6 1.6
1 25 125 17.5 54 33.4 62 50.8 7 88.9 1.6
1 1/4 32 135 20.7 64 42.2 67 63.5 7 98.4 1.6
1 1/2 40 155 22.3 70 48.3 70 73 7 114.3 1.6
2 50 165 25.4 84 60.3 73 92.1 7 127 1.6
2 1/2 65 190 28.6 100 73 79 104.8 7 149.2 1.6
3 80 210 31.8 117 88.9 83 127 7 168.3 1.6
3 1/2 90 230 35 133 101.6 86 139.7 7 184.2 1.6
4 100 275 38.1 152 114.3 102 157.2 7 215.9 1.6
5 125 330 44.5 189 141.3 114 185.7 7 266.7 1.6
6 150 355 47.7 222 168.3 117 215.9 7 292.1 1.6
8 200 420 55.6 273 219.1 133 269.9 7 349.2 1.6
10 250 510 63.5 343 273 152 323.8 7 431.8 1.6
12 300 560 66.7 400 323.8 156 381 7 489 1.6
14 350 605 69.9 432 355.6 165 412.8 7 527 1.6
16 400 685 76.2 495 406.4 178 469.9 7 603.2 1.6
18 450 745 82.6 546 457 184 533.4 7 654 1.6
20 500 815 88.9 610 508 190 584.2 7 723.9 1.6
24 600 940 101.6 718 610 203 692.2 7 838.2 1.6

Types Of Stainless Steel Weld Neck Flange


4 inch, Schedule 5, RF 300LB, A182 F5 Welding Neck Flanges

4 inch, Schedule 5, RF 300LB, A182 F5 Welding Neck Flanges

1 inch, 1500#, Schedule 160, DIN 2632, DN10-DN400, Raised Face 304L Wnrf Flange

1 inch, 1500#, Schedule 160, DIN 2632, DN10-DN400, Raised Face 304L Wnrf Flange

3 inch, 125#, Schedule 5, Weld Neck 304L Flanges

3 inch, 125#, Schedule 5, Weld Neck 304L Flanges

4 inch, SCH 40, Class 150, PN25, DN300, ASTM F316L, Raised Face Weld Neck Flange

4 inch, SCH 40, Class 150, PN25, DN300, ASTM F316L, Raised Face Weld Neck Flange

 20 inch, Schedule 10S, 150#,  EN1092-1, F304L, RF, PN16, DN50, Reducing Weld Neck Flange

20 inch, Schedule 10S, 150#, EN1092-1, F304L, RF, PN16, DN50, Reducing Weld Neck Flange

3 inch, SCH 80, 300LB DN150, PN150, RTJ, ASTM A694 F60 Weld Neck Flange

3 inch, SCH 80, 300LB DN150, PN150, RTJ, ASTM A694 F60 Weld Neck Flange

6 inch, 1500#, WT 34 MM, PN100, RTJ, DN800, ASTM A105N WN Flange

6 inch, 1500#, WT 34 MM, PN100, RTJ, DN800, ASTM A105N WN Flange

4 inch, SCH 80, 300LB, ASTM A105 PN100, DN200, RTJ Weld Neck Flange

4 inch, SCH 80, 300LB, ASTM A105 PN100, DN200, RTJ Weld Neck Flange

3 inch, 600#, DN65, SCH 80S, Weld Neck 316L flange en 1092 1

3 inch, 600#, DN65, SCH 80S, Weld Neck 316L flange en 1092 1

 2 inch, 150 MM, DN25, PN100, ASTM A182 F11 Class 2 LWN Flange

2 inch, 150 MM, DN25, PN100, ASTM A182 F11 Class 2 LWN Flange

 1 inch, Class 600, ASTM A352 Golden Welding Neck Flange

1 inch, Class 600, ASTM A352 Golden Welding Neck Flange

8 inch, 300LB, SCH 80, S32750, DN200, PN20, RF, Weld Neck Schedule 10 flange

8 inch, 300LB, SCH 80, S32750, DN200, PN20, RF, Weld Neck Schedule 10 flange



Manufacting High-Class ANSI B16.5 1500 Lbs Raised Face Weld Neck Flange, Check BS10 Flat Face Weld Neck Flange Pressure Class, JIS 20k Reducing Weld Neck Flange Available In A Wide Range Of Grades And Shapes.

Din En 1092 1 Welding Neck Flang Pressure Chart

ASME B16.5 Weld Nek Flange pressure rating in psig
Temperature (F°) 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 285 740 985 1480 2220 3705 6170
200 260 680 905 1360 2035 3395 5655
300 230 655 870 1310 1965 3270 5450
400 200 635 845 1265 1900 3170 5280
500 170 605 805 1205 1810 3015 5025
600 140 570 755 1135 1705 2840 4730
650 125 550 730 1100 1650 2745 4575
700 110 530 710 1060 1590 2655 4425
750 95 505 675 1015 1520 2535 4230
800 80 410 550 825 1235 2055 3430
850 65 320 425 640 955 1595 2655
900 50 230 305 460 690 1150 1915
950 35 135 185 275 410 685 1145
1000 20 85 115 170 255 430 715


Class 1500 Flange WNRF ASME B16.5 Dimensions Table

Size in In. Size in Millimeter (OD) Outer Diameter Flange Thick. Hub Outer Diameter Weld Neck Outer Diameter Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 120 22.3 38 21.3 60 Refer Note 34.9 7 82.6 1.6
3/4 20 130 25.4 44 26.7 70 42.9 7 88.9 1.6
1 25 150 28.6 52 33.4 73 50.8 7 101.6 1.6
1 1/4 32 160 28.6 64 42.2 73 63.5 7 111.1 1.6
1 1/2 40 180 31.8 70 48.3 83 73 7 123.8 1.6
2 50 215 38.1 105 60.3 102 92.1 7 165.1 1.6
2 1/2 65 245 41.3 124 73 105 104.8 7 190.5 1.6
3 80 265 47.7 133 88.9 117 127 7 203.2 1.6
4 100 310 54 162 114.3 124 157.2 7 241.3 1.6
5 125 375 73.1 197 141.3 156 185.7 7 292.1 1.6
6 150 395 82.6 229 168.3 171 215.9 7 317.5 1.6
8 200 485 92.1 292 219.1 213 269.9 7 393.7 1.6
10 250 585 108 368 273 254 323.8 7 482.6 1.6
12 300 675 123.9 451 323.8 283 381 7 571.5 1.6
14 350 750 133.4 495 355.6 298 412.8 7 635 1.6
16 400 825 146.1 552 406.4 311 469.9 7 704.8 1.6
18 450 915 162 597 457 327 533.4 7 774.7 1.6
20 500 985 177.8 641 508 356 584.2 7 831.8 1.6
24 600 1170 203.2 762 610 406 692.2 7 990.6 1.6


Schedule 10 2500 Lb Raised Face Weld Neck Flange Dimensions Chart

Size in In. Size in Millimeter (OD) Flange Thick. Hub O.D. Weld Neck O.D. Welding Neck Length Bore RF Diameter RF Height PCD WF
A B C D E F G H I J
1/2 15 135 30.2 43 21.3 73 Refer Note 34.9 7 88.9 1.6
3/4 20 140 31.8 51 26.7 79 42.9 7 95.2 1.6
1 25 160 35 57 33.4 89 50.8 7 108 1.6
1 1/4 32 185 38.1 73 42.2 95 63.5 7 130.2 1.6
1 1/2 40 205 44.5 79 48.3 111 73 7 146 1.6
2 50 235 50.9 95 60.3 127 92.1 7 171.4 1.6
2 1/2 65 265 57.2 114 73 143 104.8 7 196.8 1.6
3 80 305 66.7 133 88.9 168 127 7 228.6 1.6
4 100 355 76.2 165 114.3 190 157.2 7 273 1.6
5 125 420 92.1 203 141.3 229 185.7 7 323.8 1.6
6 150 485 108 235 168.3 273 215.9 7 368.3 1.6
8 200 550 127 305 219.1 318 269.9 7 438.2 1.6
10 250 675 165.1 375 273 419 323.8 7 539.8 1.6
12 300 760 184.2 441 323.8 464 381 7 619.1 1.6


Global Suppliers of Bs10 Table E Weld Neck Flange In India, ASME B16.5 Weld Neck Flange Schedule Chart, Contact US Today For Buy Sch 40 Weld Neck Ring Type Joint Flange, 4 inch Weld Neck Slip On Flange Delivering Everywhere.

BS10 Table E Weld Neck Flange Schedule Chart

ASME B16.5 Weld Neck Flange Weight in inch
NPS O
D
Sch
10
Sch
20
Sch
30
Std.
Wall
Sch
40
Sch
60
Extra
Strong
Sch
80
Sch
100
Sch
120
Sch
140
Sch
160
Double
Extra
Strong
1/2” 0.840 0.674 0.622 0.622 0.546 0.546 0.464 0.252
3/4” 1.050 0.884 0.824 0.824 0.742 0.742 0.612 0.434
1” 1.315 1.097 1.049 1.049 0.957 0.957 0.815 0.599
1.1/4” 1.660 1.442 1.380 1.380 1.278 1.278 1.160 0.896
1.1/2” 1.900 1.682 1.610 1.610 1.500 1.500 1.338 1.100
2” 2.375 2.157 2.067 2.067 1.939 1.939 1.687 1.503
2.1/2” 2.875 2.635 2.469 2.469 2.323 2.323 2.125 1.771
3” 3.500 3.260 3.068 3.068 2.900 2.900 2.624 2.300
3-1/2” 4.000 3.760 3.548 3.548 3.364 3.364 2.728
4” 4.500 4.260 4.026 4.026 3.826 3.826 3.624 3.438 3.152
5” 5.563 5.295 5.047 5.047 4.813 4.813 4.563 4.313 4.063
6” 6.625 6.357 6.065 6.065 5.761 5.761 5.501 5.187 4.897
8” 8.625 8.329 8.125 8.071 7.981 7.981 7.813 7.625 7.625 7.437 7.187 7.001 6.813 6.875
10” 10.750 10.420 10.250 10.136 10.020 10.020 9.750 9.750 9.562 9.312 9.062 8.750 8.500 8.750
12” 12.750 12.390 12.250 12.090 12.000 11.938 11.626 11.750 11.374 11.062 10.750 10.500 10.126 10.750
14” 14.000 13.500 13.376 13.250 13.250 13.124 12.812 13.000 12.500 12.124 11.814 11.500 11.188
16” 16.000 15.500 15.376 15.250 15.250 15.000 14.688 15.000 14.312 13.938 13.564 13.124 12.812
18” 18.000 17.500 17.376 17.124 17.250 16.876 16.500 17.000 16.124 15.688 15.250 14.876 14.438
20” 20.000 19.500 19.250 19.000 19.250 18.812 18.376 19.000 17.938 17.438 17.000 16.500 16.062
24” 24.000 23.500 23.250 22.876 23.250 22.624 22.062 23.000 21.562 20.938 20.376 19.876 19.312
30” 30.000 29.376 29.000 28.750 29.250 29.000
36” 36.000 35.376 35.000 34.750 35.250 34.500 35.000
42” 42.000 41.250 41.000


Tolerances Of Stainless Steel Weld Neck Flange

Dimension Flange Tolerance
A O.D.
  • When O.D. is 24" or less: ±1/16" (1.6 Millimeter)
  • When O.D. is over 24": ±1/8" (3.2 Millimeter)
D Inside Diameter
  • 10" and smaller: ±1/32" (0.8 Millimeter)
  • 12" thru 18": +1/8" (3.2 Millimeter)
  • 20" and larger: -1/16" (1.6Millimeter)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8Millimeter)
  • 1/4" Raised Face, Tongue & Groove (male & female): ±1/64" (0.4 Millimeter)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 Millimeter)
  • When hub base is over 24": ±1/8" (3.2 Millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 Millimeter), -1/32" (0.8 Millimeter)
  • 6" and larger: +5/32" (4.0 Millimeter), -1/32 (0.8 Millimeter)
P Drilling
  • Bolt circle: ±1/16" (1.6 Millimeter)
  • Bolt hole spacing: ±1/32" (0.8 Millimeter)
Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 Millimeter) max.
  • 3" and larger ±1/16" (1.6 Millimeter) max.
C Thickness
  • 18" and smaller: ±1/8" (3.2 Millimeter), -0"
  • 20" and larger: ±3/16" (4.8 Millimeter), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 Millimeter)
  • 12" and larger: ±1/8" (3.2 Millimeter)

DIN 2631 PN6 Welding Neck Flange Dimensions

DIN 2631 PN6 Welding Neck Flange
PN 6
DN d1 D b k h1 d3 s h2 d4 f d2 Holes kg
10 14.0 75 12 50 28 22 1.8 6 35 2 11 4 0.335
10 17.2 75 12 50 28 26 1.8 6 35 2 11 4 0.335
15 20.0 80 12 55 30 28 2.0 6 40 2 11 4 0.392
15 21.3 80 12 55 30 30 2.0 6 40 2 11 4 0.392
20 25.0 90 14 65 32 35 2.3 6 50 2 11 4 0.592
20 26.9 90 14 65 32 38 2.3 6 50 2 11 4 0.592
25 30.0 100 14 75 35 40 2.6 6 60 2 11 4 0.747
25 33.7 100 14 75 35 42 2.6 6 60 2 11 4 0.747
32 38.0 120 14 90 35 50 2.6 6 70 2 14 4 1.050
32 42.4 120 14 90 35 55 2.6 6 70 2 14 4 1.050
40 44.5 130 14 100 38 58 2.6 7 80 3 14 4 1.180
40 48.3 130 14 100 38 62 2.6 7 80 3 14 4 1.180
50 57.0 140 14 110 38 70 2.9 8 90 3 14 4 1.340
50 60.3 140 14 110 38 74 2.9 8 90 3 14 4 1.340
65 76.1 160 14 130 38 88 2.9 9 110 3 14 4 1.670
80 88.9 190 16 150 42 102 3.2 10 128 3 18 4 2.710
100 108.0 210 16 170 45 122 3.6 10 148 3 18 4 3.240
100 114.3 210 16 170 45 130 3.6 10 148 3 18 4 3.240
125 133.0 240 18 200 48 148 4.0 10 178 3 18 8 4.490
125 139.7 240 18 200 48 155 4.0 10 178 3 18 8 4.490
150 159.0 265 18 225 48 172 4.5 12 202 3 18 8 5.150
150 168.3 265 18 225 48 184 4.5 12 202 3 18 8 5.150
200 219.1 320 20 280 55 236 5.9 15 258 3 18 8 7.780
250 267.0 375 22 335 60 282 6.3 15 312 3 18 12 10.800
250 273.0 375 22 335 60 290 6.3 15 312 3 18 12 10.800
300 323.9 440 22 395 62 342 7.1 15 365 4 22 12 14.000
350 355.6 490 22 445 62 385 7.1 15 415 4 22 12 18.500
350 368.0 490 22 445 62 385 7.1 15 415 4 22 12 16.700
400 406.4 540 22 495 65 438 7.1 15 465 4 22 16 21.200
400 419.0 540 22 495 65 438 7.1 15 465 4 22 16 19.000
500 508.0 645 24 600 68 538 7.1 15 570 4 22 20 28.600
600 610.0 755 24 705 70 640 7.1 16 670 5 26 20 31.500
700 711.0 860 24 810 70 740 7.1 16 775 5 26 24 37.400
800 813.0 975 24 920 70 842 7.1 16 880 5 30 24 46.100
900 914.0 1075 26 1020 70 942 7.1 16 980 5 30 24 55.600
1000 1016.0 1175 26 1120 70 1045 7.1 16 1080 5 30 28 61.900
1200 1220.0 1405 28 1340 90 1248 8.0 20 1295 5 33 32 100.000
1400 1420.0 1630 32 1560 90 1452 8.0 20 1510 5 36 36 149.000
1600 1620.0 1830 34 1760 90 1655 9.0 20 1710 5 36 40 180.000

DIN 2633 PN16 Welding Neck Flange Dimensions

DIN 2631 PN6 Welding Neck Flange

PN 16
DN d1 D b k h1 d3 s h2 d4 f d2 Holes kg
10 14.0 90 14 60 35 25 1.8 6 40 2 14 4 0.580
10 17.2 90 14 60 35 28 1.8 6 40 2 14 4 0.580
15 20.0 95 14 65 35 30 2.0 6 45 2 14 4 0.648
15 21.3 95 14 65 35 32 2.0 6 45 2 14 4 0.648
20 25.0 105 16 75 38 38 2.3 6 58 2 14 4 0.952
20 26.9 105 16 75 38 40 2.3 6 58 2 14 4 0.952
25 30.0 115 16 85 38 42 2.6 6 68 2 14 4 1.140
25 33.7 115 16 85 38 45 2.6 6 68 2 14 4 1.140
32 38.0 140 16 100 40 52 2.6 6 78 2 18 4 1.690
32 42.4 140 16 100 40 56 2.6 6 78 2 18 4 1.690
40 44.5 150 16 110 42 60 2.6 7 88 3 18 4 1.860
40 48.3 150 16 110 42 64 2.6 7 88 3 18 4 1.860
50 57.0 165 18 125 45 72 2.9 8 102 3 18 4 2.530
50 60.3 165 18 125 45 75 2.9 8 102 3 18 4 2.530
65 76.1 185 18 145 45 90 2.9 10 122 3 18 4 3.060
80 88.9 200 20 160 50 105 3.2 10 138 3 18 8 3.700
100 108.0 220 20 180 52 125 3.6 12 158 3 18 8 4.620
100 114.3 220 20 180 52 131 3.6 12 158 3 18 8 4.620
125 133.0 250 22 210 55 150 4.0 12 188 3 18 8 6.300
125 139.7 250 22 210 55 156 4.0 12 188 3 18 8 6.300
150 159.0 285 22 240 55 175 4.5 12 212 3 22 8 7.750
150 168.3 285 22 240 55 184 4.5 12 212 3 22 8 7.750
175 193.7 315 24 270 60 210 5.4 12 242 3 22 8 9.850
200 219.1 340 24 295 62 235 5.9 16 268 3 22 12 11.000
250 267.0 405 26 355 70 285 6.3 16 320 3 26 12 15.600
250 273.0 405 26 355 70 292 6.3 16 320 3 26 12 15.600
300 323.9 460 28 410 78 344 7.1 16 378 4 26 12 22.000
350 355.6 520 30 470 82 390 8.0 16 438 4 26 16 31.200
350 368.0 520 30 470 82 390 8.0 16 438 4 26 16 28.800
400 406.4 580 32 525 85 445 8.0 16 490 4 30 16 39.300
400 419.0 580 32 525 85 445 8.0 16 490 4 30 16 36.300
500 508.0 715 34 650 90 548 8.0 16 610 4 33 20 61.000
600 610.0 840 36 770 95 652 8.8 18 725 5 36 20 75.400
700 711.0 910 36 840 100 755 8.8 18 795 5 36 24 77.000
800 813.0 1025 38 950 105 855 10.0 20 900 5 39 24 101.000
900 914.0 1125 40 1050 110 955 10.0 20 1000 5 39 28 122.000
1000 1016.0 1255 42 1170 120 1058 10.0 22 1115 5 42 28 162.000
1200 1220.0 1485 48 1390 130 1262 12.5 30 1330 5 48 32 243.000
1400 1420.0 1685 52 1590 145 1465 14.2 30 1530 5 48 36 323.000
1600 1620.0 1930 58 1820 160 1668 16.0 35 1750 5 56 40 479.000