CL 600# Stainless Steel Slip On Flange Pressure Rating and Dimensions in mm
There are different forms of flanges that find use in piping systems of process based industries. In industries like power generation or even the oil and gas industry, the flow of media could have different pressures. During a routine cleaning or inspection phase, this media flow needs to be stopped or restricted. This action alone causes undue stress to any ASME B16.5 Class 600 Flange. Therefore it is mandatory that the flanges undergo testing. However, as a precautionary measure, buyers may use weight charts or take recommendations from the manufacturers in selecting the appropriate 600# Flange Pressure Ratinge. Selecting the appropriate flange requires a more thorough and details study of the application, including its temperature range, pressure range, type of flange for e.g. Rtj Blind Flange Class 600 as well as the materials used. It is relatively easier to choose a flange by referring to ASME standards because they offer relevant information. There are several vital points discussed in standard ASME B16.5 like its 600 Lb Flange Dimension, pressure as well as temperature ratings, size, tolerances, marking and testing. Supplementary inclusions of the ASME B16.5 are bolting, joints in addition to the gasket for Class 600 Stainless Steel Flange.
Another major aspect that plays an important role in the longevity of the product is the type of material selected. Therefore durable materials are always preferred. But some applications have a high initial cost and the buyer is required to lower the cost of the application. This could be done by choosing economical materials like carbon steel or even stainless steel. Being the cheapest material, Carbon Steel Slip On Flange Class 600 have high toughness and little or no resistance to corrosion, which could be rectified by processing it with galvanization.
Class 600 Flange
ANSI B16.5 600# Flange
ASA B16.5 600 Lb Flange
Flange Class 600 Pressure Rating Formula
| Temperature (in F°) | 600# |
|---|---|
| < 10 | 1480 |
| 200 | 1360 |
| 300 | 1310 |
| 400 | 1265 |
| 500 | 1205 |
| 600 | 1135 |
| 650 | 1100 |
| 700 | 1060 |
| 750 | 1015 |
| 800 | 825 |
| 850 | 640 |
| 900 | 460 |
| 950 | 275 |
| 1000 | 170 |
ANSI B16.5 600# Flange Specification Chart
| Specification : | ASME B16.5 Class 600 Flange |
|---|---|
| Japanese Standards | 16 K 20 K, 5K, 10 K, 40 K, 30 K, 63 K |
| Production technique |
|
| Size Chart | 1/2" to 48" |
| Standards | MSS S44, ISO70051, EN-1092, DIN, ANSI, ASME/ANSI B16.5/16.36/16.47A/16.47B, BS1560-3.1, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, API7S-15, EN1092, API7S-43, API605, BS4504 |
| UNI Standards | 25Bar 6Bar 40Bar 10Bar 16Bar |
| EN Standards | 40Bar 25Bar 10Bar 16Bar 6Bar |
| Manufacturing Shapes | Ring Type Joint, Flat Face, Raised Face, Lap-Joint Face, Small Tongue, Large Tongue & Groove, Large Male-Female, Groove, Small Male-Female |
| Pressure Rating ANSI | 600 LBS, 2500 LBS 900 LBS, 1500 LBS, Class 150 LBS, 300 LBS |
| Most common types | Threaded / Forged / Plate /Screwed |
Class 600 Flange Manufacturers in india, Check 600 Lb Flange Dimension, 600# blind Flange Bolt Size.
ASA B16.5 600 Lb Flange Dimension Table
| ASME B16.5 Class 600 Flange Dimensions | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Normal Size Of Pipe | Flanges Diameter 'O' |
Diameter of Bolt Circle 'A' |
Diameter of Bolt Holes 'D' |
No. of Holes |
Thk of Flanges 'C' |
Diametermeter at Weld Bevel | Diameter of Hub 'E' |
Length Through Hub | Bore 'B' | Diameter of R/F R |
Depth of Socket F |
Length of Threading |
||||
| S/O & S/W Y |
W/N Y |
L/J Y |
S/O & S/W B |
L/J B |
||||||||||||
| 1/2'' | 15 | 95.2 | 66.7 | 15.9 | 4 | 14.3 | 21.3 | 38.1 | 22.2 | 52.4 | 22.2 | 22.3 | 22.9 | 34.9 | 9.5 | 15.9 |
| 3/4'' | 20 | 117.5 | 82.5 | 19.0 | 4 | 15.9 | 26.7 | 47.6 | 25.4 | 57.1 | 25.4 | 27.7 | 28.2 | 42.9 | 11.1 | 15.9 |
| 1'' | 25 | 123.8 | 88.9 | 19.0 | 4 | 17.5 | 33.5 | 54.0 | 27.0 | 61.9 | 27.0 | 34.5 | 35.0 | 50.8 | 12.7 | 17.5 |
| 1 | 32 | 133.3 | 98.4 | 19.0 | 4 | 20.6 | 42.2 | 63.5 | 28.6 | 66.7 | 28.6 | 43.2 | 43.7 | 63.5 | 14.3 | 20.6 |
| 1 | 40 | 155.6 | 114.3 | 22.2 | 4 | 22.2 | 48.3 | 69.8 | 31.7 | 69.8 | 31.7 | 49.5 | 50.0 | 73.0 | 15.9 | 22.2 |
| 2'' | 50 | 165.1 | 127.0 | 19.0 | 8 | 25.4 | 60.4 | 84.1 | 36.5 | 73.0 | 36.5 | 62.0 | 62.5 | 92.1 | 17.5 | 25.4 |
| 2 | 65 | 190.5 | 149.2 | 22.2 | 8 | 28.6 | 73.1 | 100.0 | 41.3 | 79.4 | 41.3 | 74.7 | 75.4 | 104.8 | 19.0 | 28.6 |
| 3'' | 80 | 209.5 | 168.3 | 22.2 | 8 | 31.8 | 88.9 | 117.5 | 46.0 | 82.5 | 46.0 | 90.7 | 91.4 | 127.0 | - | 30.2 |
| 3 | 90 | 228.5 | 184.2 | 22.2 | 8 | 34.9 | 101.6 | 133.4 | 49.3 | 85.7 | 49.3 | 103.4 | 104.1 | 140.0 | - | 31.7 |
| 4'' | 100 | 273.0 | 215.9 | 25.4 | 8 | 38.1 | 114.3 | 152.4 | 54.0 | 101.6 | 54.0 | 116.1 | 116.8 | 157.2 | - | 33.3 |
| 5'' | 125 | 330.2 | 266.7 | 28.6 | 8 | 44.4 | 141.2 | 188.9 | 60.3 | 114.3 | 60.3 | 143.8 | 144.5 | 185.7 | - | 36.5 |
| 6'' | 150 | 355.6 | 292.1 | 28.6 | 12 | 47.6 | 168.4 | 222.2 | 66.7 | 117.5 | 66.7 | 170.7 | 171.4 | 215.9 | - | 39.7 |
| 8'' | 200 | 419.1 | 349.2 | 31.7 | 12 | 55.6 | 219.2 | 273.0 | 76.2 | 133.3 | 76.2 | 221.5 | 222.2 | 269.9 | - | 44.4 |
| 10'' | 250 | 508.0 | 431.8 | 34.9 | 16 | 63.5 | 273.0 | 342.9 | 85.7 | 152.4 | 111.2 | 276.3 | 277.4 | 323.8 | - | 49.2 |
| 12'' | 300 | 558.8 | 488.9 | 34.9 | 20 | 66.7 | 323.8 | 400.0 | 92.1 | 155.6 | 117.3 | 327.1 | 328.2 | 381.0 | - | 55.6 |
| 14'' | 350 | 603.2 | 527.0 | 38.1 | 20 | 69.9 | 355.6 | 431.8 | 93.7 | 165.1 | 127.0 | 359.1 | 360.2 | 412.7 | - | 57.1 |
| 16'' | 400 | 685.8 | 603.2 | 41.3 | 20 | 76.2 | 406.4 | 495.3 | 106.4 | 177.8 | 139.7 | 410.5 | 411.2 | 469.9 | - | 63.5 |
| 18'' | 450 | 742.9 | 654.0 | 44.4 | 24 | 82.6 | 457.2 | 546.1 | 117.5 | 184.1 | 152.4 | 461.8 | 462.3 | 533.4 | - | 68.3 |
| 20'' | 500 | 812.8 | 723.9 | 44.4 | 24 | 88.9 | 508.0 | 609.6 | 127.0 | 190.5 | 165.1 | 513.1 | 514.3 | 584.2 | - | 73.0 |
| 24'' | 600 | 939.8 | 838.2 | 50.8 | 24 | 101.6 | 609.6 | 717.5 | 139.7 | 203.2 | 184.1 | 615.9 | 615.9 | 692.1 | - | 82.5 |
Types Of Carbon Steel Class 600 Flange
2 inch, SCH10, Stainless Steel RF Socket Weld 600# Flange
1 inch, Standard 316L, Sch 80, WN 600# Flange
4 inch, Schedule 40, F304L, Slip-on 600# Flange
8 inch, Schedule 120, 321 Blind 600# Flange
6 inch, F304L, Carbon Steel RF Weldneck 600# Flange
5 inch, Sch80s, Lap Joint 316L Class 600 Flange
2 inch, Stainless Steel 600# Socket Weld Flange
15 inch, Standard A20, Raised Face 600# Flange
2 inch, SCH20, F304L, Weld Neck 600# Flange
2 inch, A182 F316L, RF Threaded 600# Flange
2 inch, Corrugated Water Tight Weldneck Schedule 5 60# Flange
3 inch, 600 psi, Straight Backup Ring Flange
Get Reasonable Cost Of Weld Neck Flange Class 600, Dimension Table Of Alloy Steel Class 600 Flange Material & Rtj Blind Flange Class 600, 600 Lb Raised Face Flange Manufacturers In Mumbai.
ASTM A105 600# blind Flange Bolt Chart
600LB Flanges |
||||
|---|---|---|---|---|
| Nominal Size Of Pipe | # Bolts or Studs | Diameter of Bolts or Studs | Length of Stud | |
| 1/16 RF | RTJ | |||
| 1/2 | 4 | 0.50 | 2-1/4 | - |
| 3/4 | 4 | 0.50 | 2-1/2 | - |
| 1 | 4 | 0.50 | 2-1/2 | 3 |
| 1-1/4 | 4 | 0.50 | 2-3/4 | 3-1/4 |
| 1-1/2 | 4 | 0.50 | 2-3/4 | 3-1/4 |
| 2 | 4 | 0.63 | 3-1/4 | 3-3/4 |
| 2-1/2 | 4 | 0.63 | 3-1/2 | 4 |
| 3 | 4 | 0.63 | 3-1/2 | 4 |
| 3-1/2 | 8 | 0.63 | 3-1/2 | 4 |
| 4 | 8 | 0.63 | 3-1/2 | 4 |
| 5 | 8 | 0.75 | 3-3/4 | 4-1/4 |
| 6 | 8 | 0.75 | 4 | 4-1/2 |
| 8 | 8 | 0.75 | 4-1/4 | 4-3/4 |
| 10 | 12 | 0.88 | 4-1/2 | 5 |
| 12 | 12 | 0.88 | 4-3/4 | 5-1/4 |
| 14 | 12 | 1.00 | 5-1/4 | 5-3/4 |
| 16 | 16 | 1.00 | 5-1/4 | 5-3/4 |
| 18 | 16 | 1.13 | 5-3/4 | 6-1/4 |
| 20 | 20 | 1.13 | 6-1/4 | 6-3/4 |
| 24 | 20 | 1.25 | 6-3/4 | 7-1/4 |
Class 600 Pipe Flange Minimum Weight
| Class | Nominal Size Of Pipe | SORF | NPT | SW | Lap Joint | BLRF | WN |
| Class 600 | ½ | 1 | 1 | 2 | 1 | 2 | 2 |
| ¾ | 2 | 2 | 2 | 2 | 2 | 2 | |
| 1 | 2 | 2 | 2 | 2 | 2 | 3 | |
| 1¼ | 3 | 3 | 3 | 3 | 3 | 3 | |
| 1½ | 3 | 3 | 3 | 3 | 4 | 4 | |
| 2 | 5 | 5 | 5 | 5 | 5 | 6 | |
| 2½ | 8 | 8 | 8 | 8 | 7 | 10 | |
| 3 | 9 | 9 | 9 | 9 | 9 | 11.5 | |
| 3½ | 11 | 12 | 11 | 11 | 13 | 12 | |
| 4 | 13 | 13 | 13 | 13 | 17 | 16.5 | |
| 5 | 15 | 15 | 15 | 15 | 20 | 21 | |
| 6 | 19 | 19 | 19 | 19 | 27 | 26 | |
| 8 | 30 | 30 | 30 | 30 | 47 | 42 | |
| 10 | 43 | 43 | 43 | 43 | 70 | 54 | |
| 12 | 64 | 64 | 64 | 64 | 123 | 88 | |
| 14 | 90 | 90 | 90 | 105 | 140 | 114 | |
| 16 | 106 | 98 | 98 | 140 | 180 | 140 | |
| 18 | 130 | 130 | 130 | 160 | 220 | 165 | |
| 20 | 165 | 165 | 165 | 195 | 285 | 197 | |
| 22 | 185 | 185 | 185 | 245 | 355 | 225 | |
| 24 | 220 | 220 | 220 | 275 | 430 | 268 |
We provide Class 600 Reducing Flange Expert Cutting Service In Mumbai, India, Buy Threaded Class 600 Flange With Fastest Delivery, We Provide A Complete Range Of Weld Neck 600# Flange And ASME B16.5 Class 600 Flange.
Stainless Steel Class 600 Flange Thickness Table
| Normal Size Of Pipe | "A" (O.D.) |
"B" (Thick.) |
"C" (RF Diameter) |
"D" (B.C.D.) |
# Bolt Holes |
Diameter of Bolt Holes |
Appr. Weight |
| 1/2" | 3-1/2 | 7/16 | 1-3/8 | 2-3/8 | 4 | 5/8 | 2 |
| 3/4" | 3-7/8 | 1/2 | 1-11/16 | 2-3/4 | 4 | 5/8 | 2 |
| 1" | 4-1/4 | 9/16 | 2 | 3-1/8 | 4 | 5/8 | 2 |
| 1-1/4" | 4-5/8 | 5/8 | 2-1/2 | 3-1/2 | 4 | 5/8 | 3 |
| 1-1/2" | 5 | 11/16 | 2-7/8 | 3-7/8 | 4 | 5/8 | 3 |
| 2" | 6 | 3/4 | 3-5/8 | 4-3/4 | 4 | 3/4 | 4 |
| 2-1/2" | 7 | 7/8 | 4-1/8 | 5-1/2 | 4 | 3/4 | 7 |
| 3" | 7-1/2 | 15/16 | 5 | 6 | 4 | 3/4 | 9 |
| 3-1/2" | 8-1/2 | 15/16 | 5-1/2 | 7 | 8 | 3/4 | 13 |
| 4" | 9 | 15/16 | 6-3/16 | 7-1/2 | 8 | 3/4 | 17 |
| 5" | 10 | 15/16 | 7-5/16 | 8-1/2 | 8 | 7/8 | 20 |
| 6" | 11 | 1 | 8-1/2 | 9-1/2 | 8 | 7/8 | 27 |
| 8" | 13-1/2 | 1-1/8 | 10-5/8 | 11-3/4 | 8 | 7/8 | 47 |
| 10" | 16 | 1-3/16 | 12-3/4 | 14-1/4 | 12 | 1 | 67 |
| 12" | 19 | 1-1/4 | 15 | 17 | 12 | 1 | 123 |
| 14" | 21 | 1-3/8 | 16-1/4 | 18-3/4 | 12 | 1-1/8 | 139 |
| 16" | 23-1/2 | 1-7/16 | 18-1/2 | 21-1/4 | 16 | 1-1/8 | 187 |
| 18" | 25 | 1-9/16 | 21 | 22-3/4 | 16 | 1-1/4 | 217 |
| 20" | 27-1/2 | 1-11/16 | 23 | 25 | 20 | 1-1/4 | 283 |
| 24" | 32 | 1-7/8 | 27-1/4 | 29-1/2 | 20 | 1-3/8 | 415 |
ASME B16.5 Class 600 Flange Thickness, Available Slip On Flange Class 600 In Bulk, Looking For 600# Rtj Flange At Best Price? Call Rajveer Stainless And Alloy For Wnrf Flange Class 600 And ASME B16.5 Class 600 Flange With Low Price.
A182 F304 Class 600 Flange Size
| Normal Size Of Pipe (inch) |
600LB | ||||
|---|---|---|---|---|---|
| Diammeter of Flanges (inch) |
No. of Bolts |
Diammeter of Bolts (inch) |
Diammeter of Bolt Holes (inch) |
Bolt Circle (inch) |
|
| 1/4 | 3-3/8 | 4 | 1/2 | 0.62 | 2-1/4 |
| 1/2 | 3-1/2 | 4 | 1/2 | 0.62 | 2-3/8 |
| 3/4 | 3-7/8 | 4 | 1/2 | 0.62 | 2-3/4 |
| 1 | 4-1/4 | 4 | 1/2 | 0.62 | 3-1/8 |
| 1-1/4 | 4-5/8 | 4 | 1/2 | 0.62 | 3-1/2 |
| 1-1/2 | 5 | 4 | 1/2 | 0.62 | 3-7/8 |
| 2 | 6 | 4 | 5/8 | 0.75 | 4-3/4 |
| 2-1/2 | 7 | 4 | 5/8 | 0.75 | 5-1/2 |
| 3 | 7-1/2 | 4 | 5/8 | 0.75 | 6 |
| 3-1/2 | 8-1/2 | 8 | 5/8 | 0.75 | 7 |
| 4 | 9 | 8 | 5/8 | 0.75 | 7-1/2 |
| 5 | 10 | 8 | 3/4 | 0.88 | 8-1/2 |
| 6 | 11 | 8 | 3/4 | 0.88 | 9-1/2 |
| 8 | 13-1/2 | 8 | 3/4 | 0.88 | 11-3/4 |
| 10 | 16 | 12 | 7/8 | 1 | 14-1/4 |
| 12 | 19 | 12 | 7/8 | 1 | 17 |
| 14 | 21 | 12 | 1 | 1.12 | 18-3/4 |
| 16 | 23-1/2 | 16 | 1 | 1.12 | 21-1/4 |
| 18 | 25 | 16 | 1-1/8 | 1.25 | 22-3/4 |
| 20 | 27-1/2 | 20 | 1-1/8 | 1.25 | 25 |
| 24 | 32 | 20 | 1-1/4 | 1.38 | 29-1/2 |
