Check Stainless Steel 304 Forged Fittings Wall Thickness, Specification Chart Of ASME B16.11 SS forged fittings.
Stainless steel encompasses several alloy grades. While specific grades exhibit properties unique to the alloying composition, in general, stainless steels have higher mechanical properties. The tensile strength of popular Stainless Steel Forged Fittings like grade 304 & 316 is much superior to that of regular carbon steel grades or even alloy steels. Though the cost is marginally higher than their carbon and alloy steel counterparts, the properties are exponentially much higher. Thus, the durability of a SS Forged Elbow to either of the former alloys. Not to mention their resistance to different corrosive environments also ranks much higher. For instance, the ASME B16.11 316L SS Socket weld Fittings are well suited for use in marine environments and exhibit resilience, especially to halogenic solutions, including ones like chlorine, bromine or even fluorine. Engineers prefer the use of grade 316 for the construction of parts that are to be near the coastal area or in seawater because this alloy resists corrosion caused by brine and saltwater. The SS 316L Pipe Nipples are also able to demonstrate good resistance to oxidation. And the mechanical properties and corrosion resistance of grade 316 fittings are much higher than that of grade 304.

Stainless Steel Forged Fittings

Stainless Steel 304 Forged Fittings

ASME B16.11 SS Forged Fittings

ASTM A182 SS 316L Forged Elbow

Stainless Steel 317 Pipe Nipples

ASME B16.5 Stainless Steel Forged Olets
However, if a high strength and minimal resistance to corrosion are required, ASTM A182 Stainless Steel 304 Forged Fittings are the best option for the said application. Due to their superior properties, industries like power generation, automobile, pharmaceutical, textiles, sugar as well as the food industry heavily use the Forged Stainless Steel Pipe Fittings in their factories.

Forged Stainless Steel Pipe Fittings Thickness
Description | Class Designation | ||
---|---|---|---|
Class 3000 | Class 6000 | Class 9000 | |
NPT 90 Elbow deg & SW Elbow 45 deg SW Tee, NPT Crosse, SW Coupling, NPT Half-Couplings, Union, Socket End or Pipe Caps |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
NPS by Wall Thick. |
SCH80 | SCH160 | XXS |
Stainless Steel Forged Fittings Manufacturer In India |

Stainless Steel Forged Fittings Manufacturer In India
Types Of Forged Stainless Steel Pipe Fittings

3/4 Inch, 3000#, ANSI B16.11, NPT, Forged ASTM A182 F304L Cap

DN20, PN400, ASTM A182 316L Threaded NPT Cap

4 Inch, CL3000, ASME B16.11, A182 316L Stainless Steel Full Coupling

1 Inch, Class 3000, FNPT Ends, ASTM A182 304L Half Coupling

1 1/2 Inch, Class 150 LB, ANSI B16.11, A182 321 NPT Elbow

1/2 Inch NPT Screwed, 90 DEG, Class 3000, ASTM A182 F304L Elbow

1 1/2 Inch, Class 3000, ASME B16.11, SW, A182 310s 90 Degree Eblow

1 Inch, 3000LB, ANSI B16.11, SW, ASTM A182 F304L 90° Elbow

2×2 Inch, 2000 LB, FNPT, ASME B16.11, ASTM A182 F316L Tee

CL3000, DN25, SW, ASME B16.11, ASTM A182 F321 Stainless Steel Equal Tee

1 1/2 Inch, Class 150 LB, SW, ANSI B16.11, A182 F304 Equal Tee

4 Inch, SCH 10S, BE, ANSI B16.11, ASTM A182 F316 Equal Tee
Specification Of Super Austenitic Stainless Steel 304 Forged Fittings
Specification | Stainless Steel Forged Fittings |
ASME B16.11 | Wrought Buttwelding Fittings |
ASME B16.11 | Socket – Welding and Threaded, Forged Fittings |
MSS SP-95 | Bull Plugs & Swage(d) Nipples |
MSS SP-43 | Corrosion Resistant Applications, Fabricated and Wrought Butt-Welding Fittings for Low Pressure |
ASTM A182 – ASME SA182 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
BS3799 | Specification of Threaded/ screwed and Socket-welding, Steel pipe fittings |
Check SS Forged Fittings Specification Table |
---|
Dimensional Format Of Forged Stainless Steel Pipe Fittings, Weight Formula Of UNS S31603 Elbow, We Provide Different Type Of Stainless Steel Forged Socket weld Pipe Fittings In India.
Chromium Stainless Steel Forged Elbow Dimensions Chart According to ASME B16.11

ANSI B16.11 SS Forged Fittings Schedule Chart

View Chemical Compatibility Of ASTM A182 SS 316L Forged Fittings And ANSI B16.11 321 Steel Full Coupling Mechanical Properties, Stainless Steel Threaded Fittings Manufacturers.
Chemical Compatibility Of ASTM A182 SS 304L Forged Fittings
Chemical Composition Of SS Forged Fittings | ||||||||
---|---|---|---|---|---|---|---|---|
Type | C | Mn | P | S | Si | Cr | Ni | Mb |
302 | 0.15 | 2.00 | 0.045 | 0.030 | 1.00 | 17.00/19.00 | 8.00/10.00 | – |
304* | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/10.50 | – |
304L* | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/12.00 | – |
309 | 0.20 | 2.00 | 0.045 | 0.030 | 1.00 | 22.00/24.00 | 12.00/15.00 | – |
309S | 0.08 | 2.00 | 0.045 | – | 1.00 | 22.00/24.00 | – | – |
310 | 0.25 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
310S | 0.08 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
316* | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
316L* | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
317 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00/1.00 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
317L | 0.03 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
321 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 17.00/19.00 | 9.00/12.00 | 0.75/0.75 |
347 | 0.08 | 2.00 | 0.040 | 0.030 | 0.5/1.00 | 17.00/19.00 | 9.00/12.00 | 0.5/0.75 |
Stainless Steel Threaded Fittings Manufacturers |
Manufacturer Of SS Forged Tee In India, Stainless Steel Threaded Fittings Manufacturers, Grade Equivalent SS Forged Reducers.
A182 SS 316L Forged Tee Mechanical Chart
Mechanical Properties Of SS Forged Fittings | ||||||
---|---|---|---|---|---|---|
Type | UNS | Tensile (ksi) minimum |
Yield (ksi) minimum |
Elongation minimum |
Hardness (Brinell) maximum |
Hardness (Rockwell B) maximum |
302 | S30200 | 75 | 30 | 40% in 2″ | 183 | 88 |
304* | S30400 | 75 | 30 | 40% in 2″ | 183 | 88 |
304L* | S30403 | 70 | 30 | 40% in 2″ | 183 | 88 |
309 | S30900 | 75 | 30 | 40% in 2″ | 217 | 95 |
309S | S30908 | 75 | 30 | 40% in 2″ | 217 | 95 |
310 | S31000 | 75 | 30 | 40% in 2″ | 217 | 95 |
310S | S31008 | 75 | 30 | 40% in 2″ | 217 | 95 |
316* | S31600 | 75 | 30 | 40% in 2″ | 217 | 95 |
316L* | S31603 | 70 | 25 | 35% in 2″ | 217 | 95 |
317 | S31700 | 75 | 30 | 35% in 2″ | 217 | 95 |
317L | S31703 | 75 | 30 | 35% in 2″ | 217 | 95 |
321 | S32100 | 75 | 30 | 40% in 2″ | 183 | 88 |
347 | S34700 | 75 | 30 | 40% in 2″ | 183 | 88 |
Stainless Steel Threaded Fittings Manufacturers |
Contact Us For Stainless Steel Forged Socket weld Pipe Fittings Instant Delivery, Stainless Steel Socket Weld Fittings Manufacturers, Reliable Suppliers Stainless Steel Forged Fittings In Mumbai, India.
Sa A182 321 Full Coupling Equivalent
Equivalent Of SS Forged Fittings | |
---|---|
STANDARD | Stainless Steel Forged Fittings |
EN | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
JIS | SUS 316L |
BS | 316S11 / 316S13 |
UNS | S31603 |
WERKSTOFF NO. | 1.4404 / 1.4435 |
AFNOR | Z7CND17‐11‐02 |
GOST | 03Ch17N14M3 / 03Ch17N14M2 |
SS Threaded Fittings
High Pressure
Pressure Class/ Rating | 2000LBS, 3000LBS, 6000LBS |
Types | Elbow 90 & 45 Degree, Cross, Union, Tee, Street Elbow, Hex Head Bushing, Hex Head Plug, Coupling, Half Coupling, Reducing Coupling, Cap, Square Head Plug, Round Head Plug, Swage Nipple, Bull Plug, Boss, Outlet, Hex Nipple |
Dimension Staindard | ASME 16.11, BS 3799 and MSS SP-79, 83, 95, 97 |
Size range | 1/8- 4 inches (DN6 - DN100) |
Grade | ASTM A182 F304, SA 182 Gr F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347, F347H, F904L, ASTM A312/A403 TP304, TP304L, TP316, TP316L |
NPT Threads | ASME B1.20.1 |
SS Socket Weld Fittings
Pressure Rating/ Class | 3000LBS, 6000LBS, 9000LBS |
Types | Elbow 90 and 45 Degree, Cross, Union, Cap,Coupling, Tee, Half Coupling, Boss, Welding Outlet, Outlet, Insert |
Dimension Staindard & Specifications | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Sizes | 1/8- 4 inches (DN6 - DN100) |