Stainless Steel F316 Flanges Manufacturers In India

Stainless Steel 316 Flanges and ASTM A182 Grade F316 Slip On Flange

Refer Pressure Temperature Ratings For Stainless Steel 316 ANSI Flanges, Specification List Of ASTM A182 F316 Flange.

Stainless Steel 316 Flanges is a type of pipe fitting that is used to connect two pipes together with the assistance of a projection on the fitting. The 316 Material is made up of nickel chromium and molybdenum to increase strength and corrosion resistance opposed to the ordinary 304 stainless steel. Rajveer Stainless And Alloys produces flanges in ASTM A182 F316 Flange that are suitable for applications that deal with corrosive solutions and liquids such as sea water and marine applications. Food processing industrial pipe lines also uses this grade of flanges to make sure that the system does not corrode under the substance being circulated.

There are different types of flanges. The UNS S31600 Blind Flange is made up of the A182 specification and it allows two pipes to slip through the flange, so that it could be positioned well before being welded. Where a pipeline needs to be terminated, the SA 182 F316 Slip On Flange is used. The blind flanges usually have a flat closed end on one side and an opening for connection to the terminating pipe at the other end. There are lower carbon versions of the same flanges such as the ASTM A182 gr F316 Flange which are less corrosive but are also less strong. The ASME b16.5 182 F316 Socket Weld Flange along with all the other types of flanges is available from us. Please direct your custom orders to get the best out of the market.

stainless steel 316 flanges manufacturers in india
Table of Contents


ASTM A182 F316 Flange Temperature Ratings

Temperature Of Stainless Steel 316 Flanges
ANSI/ASME B16.34 ANSI PRESSURE RATING
Temperature °F Class 150 Class 300 Class 400 Class 600 Class 900 Class 1500 Class 2500
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

Stainless Steel 316 Flanges

Stainless Steel 316 Flanges


Spec Chart Of UNS S31600 Weld Neck Flanges

Specification: ASTM A182 Stainless Steel 316 Flanges
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Size Chart 1/2" to 48"
Most common types of Flanges Forged / Threaded / Screwed / Plate
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flanges Face Type Flat Face (FF), Large Male-Female (LMF), Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Ring Type Joint (RTJ)
Pressure Rating ANSI 2500 LBS, Class 150 LBS, 900 LBS, 1500 LBS, 300 LBS, 600 LBS
JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
EN 10Bar 16Bar 6Bar 25Bar 40Bar
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Cold and Hot Dip Galvanized, Yellow Transparent,
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Standards GOST Flanges, BS4504, ANSI Flanges, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, B16.47 Series A & B, BS Flanges, DIN Flanges, EN Flanges, B16.48, ANSI/ASME B16.5, BS 10, JISB2220, BS1560-3.1, API7S-15, API7S-43, EN-1092, DIN, ASME Flanges, ISO70051, API605, EN1092
Specification Table Of SS 316 Flanges

Check ASME B16.5 316 Stainless Steel Pipe Flanges Material Equivalent, SS 316 Flanges Chemical Composition, Mechanical Strength Of ASTM A182 Grade F316 Blind Flanges.


ANSI 316 Stainless Steel Flanges Equivalent

Equivalent Of SS 316 Flanges
BS 316S31 / 316S33
GOST –
AFNOR Z7CND17‐11‐02
STANDARD ASTM A182 F316
WERKSTOFF NR. 1.4401 / 1.4436
UNS S31600
JIS SUS 316
EN X5CrNiMo17-12-2 / X3CrNiMo17-13-3

Werkstoff N0 1.4401 Chemical Composition

Chemical Chart Of SS 316 Flanges
Stainless Steel A182 F316
Ni 10 – 14
Fe Balance
Cr 16 – 18
Mo 2 – 3
C 0.08 maxi.
Si 0.75 maxi.
Mn 2 maxi.
P 0.045 maxi.
S 0.030 maxi.
N 0.1 maxi.
Ti

UNS S31600 Blind Flange Mechanical Behavior

Mechanical Properties Of SS 316 Flanges
Gr. Tensile Strength Melting Point Yield Strength (0.2%Offset) Density Elongation
ASTM A182 F316 Psi – 75000 , MPa – 515 1400 °C (2550 °F) Psi – 30000 , MPa – 205 8.0 g/cm3 35 %

Types Of 316 Stainless Steel Pipe Flanges

30 Inch, 150LB, Raised Face, ASTM A182 F316 WN Flange

30 Inch, 150LB, Raised Face, ASTM A182 F316 WN Flanges

10 Inch, CL300, SCH STD, ASME B16.5, ASTM A182 F316 WN Flange

10 Inch, CL300, SCH STD, ASME B16.5, ASTM A182 F316 WN Flanges

DN 100, PN 16, F316 Stainless Steel EN 1092-1 WN Flange

DN 100, PN 16, F316 Stainless Steel EN 1092-1 WN Flanges

6 Inch, SCH 40, 300#, ASME B16.5, ASTM A182 F316 WN RF Flange

6 Inch, SCH 40, 300#, ASME B16.5, ASTM A182 F316 WN RF Flanges

10 Inch, 600#, API 590, FF, ASTM A182 F316 Blind Flanges

10 Inch, 600#, API 590, FF, ASTM A182 F316 Blind Flanges

6 Inch, Forged, 150LB, A182 F316 Stainless Steel Blind Flange

6 Inch, Forged, 150LB, A182 F316 Stainless Steel Blind Flanges

6 Inch, 600LB, RF, ASME B16.5, ASTM A182 F316 Blind Flange

6 Inch, 600LB, RF, ASME B16.5, ASTM A182 F316 Blind Flanges

2In, CL150, RF, ASTM A182 UNS S31600 Blind Flange

2In, CL150, RF, ASTM A182 UNS S31600 Blind Flanges

10 Inch, Class 150 LB, SCH 40, ASTM A182 F3016 WN Flange

10 Inch, Class 150 LB, SCH 40, ASTM A182 F3016 WN Flanges

30 Inch, Class 600 LB, RF, ASTM A182 F3016 Weld Neck Flange

30 Inch, Class 600 LB, RF, ASTM A182 F3016 Weld Neck Flanges

12 Inch, SCH 40, RF, 150 LB, ASTM A182 F316 Weld Neck Flange

12 Inch, SCH 40, RF, 150 LB, ASTM A182 F316 Weld Neck Flanges

PN16, DN80, EN1092-1 Type 11, ASTM A182 F316 WN Flange

PN16, DN80, EN1092-1 Type 11, ASTM A182 F316 WN Flanges

150 LB, 1/2 Inch, RF, ASTM A182 F316 Stainless Steel Threaded Flange

150 LB, 1/2 Inch, RF, ASTM A182 F316 Stainless Steel Threaded Flange

4 Inch. SCH 80, ASME B16.5, F316 NPT Flanges

4 Inch. SCH 80, ASME B16.5, F316 NPT Flanges

2 Inch, 300 LB, RF, BS4504, A182 F316 Thread Flange

2 Inch, 300 LB, RF, BS4504, A182 F316 Thread Flange

2 Inch x NPTF 1-1/2 Inch, RF, A182 F316 Screw Flange

2 Inch x NPTF 1-1/2 Inch, RF, A182 F316 Screw Flange


ISO Approved ANSI B16.5 316 Stainless Steel Flanges Manufacturer in India, Reliable Supplier Of UNS S31600 Slip On Flange In Mumbai, Class 300 SS 316 Flanges Physical Properties.


ASME B16.5 SS 316 Flanges Physical Properties

Physical Properties Of SS 316 Flanges
Density 8.0 g/cm3
Melting Point 1400 °C (2550 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %

ASTM A182 F316 Stainless Steel Flanges Dimensions with Tolerances And Stainless Steel 316 Socket Weld Flanges Weight Chart According to ASME B16.9, Buy High Pressure Werkstoff N0 1.4401 Lap Joint Flanges Certified & Tested Materials.

A182 Gr F316 SORF Flanges Dimensional Format

Dimension Table Of SS 316 Flanges
CLASS NPS ASTM A182 F316 SORF Flange ASTM A182 F316 NPT Flange ASTM A182 F316 SW Flange ASTM A182 F316 Loose Flange ASTM A182 F316 BLRF Flange ASTM A182 F316 WN Flange
150# ½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
1¼ 3 3 3 3 3 3
1½ 3 3 3 3 4 4
2 5 5 5 5 5 6
2½ 8 8 8 8 7 10
3 9 9 9 9 9 11.5
3½ 11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
300# ½ 2 2 3 2 2 2
¾ 3 3 3 3 3 3
1 3 3 3 3 4 4
1¼ 4.5 4.5 4 4.5 6 5
1½ 6.5 6.5 6 6.5 7 7
2 7 7 7 7 8 9
2½ 10 10 10 10 12 12
3 13 14 13 14.5 16 18
3½ 17 17 17 17 21 20
4 23.5 24 22 24 28 26.5
5 29 31 28 28 37 36
6 39 39 39 39 50 45
8 58 58 58 58 81 69
10 81 81 81 91 124 100
12 115 115 115 140 185 142
14 165 165 165 190 250 206
16 210 220 190 234 315 250
18 253 280 250 305 414 320
20 315 325 315 375 515 400
22 370 370 370 435 640 465
24 490 490 475 550 800 580
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
400# ½ 2 2 2 2 2 3
¾ 3 3 3 3 3 3.5
1 3.5 3.5 3.5 3.5 4 4
1¼ 4.5 4.5 4.5 4.5 6 4.5
1½ 6.5 6.5 6.5 6.5 8 8
2 8 8 8 8 10 10
2½ 12 12 12 11 15 14
3 15 15 15 14 20 18
3½ 21 21 21 20 29 26
4 26 26 26 25 33 35
5 31 31 31 29 44 43
6 44 44 44 42 61 57
8 67 67 67 64 100 89
10 91 91 91 110 155 125
12 130 130 130 152 226 175
14 191 191 191 210 310 233
16 253 253 253 280 398 295
18 310 310 310 345 502 360
20 378 378 378 420 621 445
22 405 405 405 455 720 505
24 539 539 539 615 936 640
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
600# ½ 2 2 2 2 3 3
¾ 3 3 3 3 4 4
1 4 4 4 4 4 4
1¼ 5 5 5 5 6 6
1½ 7 7 7 7 8 8
2 9 9 9 9 10 12
2½ 13 13 13 12 15 18
3 16 16 16 15 20 23
3½ 21 21 21 20 29 26
4 37 37 37 36 41 42
5 63 63 63 63 68 68
6 80 80 80 78 86 81
8 115 15 15 112 140 120
10 177 177 177 195 231 190
12 215 215 215 240 295 226
14 259 259 259 290 378 347
16 366 366 366 400 527 481
18 476 476 476 469 665 555
20 612 612 612 604 855 690
22 590 590 590 670 1000 720
24 876 876 876 866 1250 977
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
900# ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 7.5 7.5 7.5 7.5 9 8.5
1¼ 10 10 10 10 10 10
1½ 14 14 14 14 14 14
2 22 22 22 21 25 24
2½ 31 31 31 25 32 31
3 36 36 36 29 35 36
4 53 53 53 51 54 53
5 83 83 83 81 87 86
6 110 110 110 105 115 110
8 172 172 172 190 200 187
10 245 245 245 277 290 268
12 326 326 326 371 415 372
14 400 400 400 415 520 562
16 459 459 459 488 619 685
18 647 647 647 670 880 924
20 792 792 792 868 1107 1164
24 1480 1480 1480 1659 2099 2107
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
1500# ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 8 8 8 8 9 9
1¼ 10 10 10 10 10 10
1½ 14 14 14 14 14 14
2 25 25 25 25 25 25
2½ 36 36 36 35 35 36
3 48 48 48 47 48 48
4 73 73 73 75 73 73
5 132 132 132 140 140 132
6 165 165 165 170 160 165
8 260 260 260 286 302 275
10 436 436 436 485 510 455
12 667 667 667 749 775 690
14 940 940 940 890 975 940
16 1250 1250 1250 1250 1300 1250
18 1625 1625 1625 1475 1750 1625
20 2050 2050 2050 1775 2225 2050
24 2825 2825 2825 2825 3625 3325
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
2500# ½ …. 7 …. 7 7 8
¾ …. 9 …. 8 10 9
1 …. 12 …. 12 12 13
1¼ …. 18 …. 17 18 20
1½ …. 25 …. 24 25 28
2 …. 38 …. 37 39 42
2½ …. 55 …. 53 56 52
3 …. 83 …. 80 86 94
4 …. 127 …. 122 133 146
5 …. 210 …. 204 223 244
6 …. 323 …. 314 345 378
8 …. 485 …. 471 533 576
10 …. 925 …. 897 1025 1068
12 …. 1300 …. 1262 1464 1608

Contact US Today For Buy Stainless Steel 316 Flanges With Best Price, Held Wide Stock Of A182 Gr F316 Weld Neck Flanges, Sa A182 F316 Stockists In Mumbai.

SA 182 F316 SW Flanges Minimum Weight

Weight Table Of SS 316 Flanges
Standard Class Dia. Bolt Circle Dia. Number of Bolts Bolt Size Dia. of Bolt Hole
AS4087 PN14 95 67 4 M12 14
AS 2129 Flange Table C 95 67 4 13 14
Table D 95 67 4 13 14
Table E 95 67 4 13 14
Table F 95 67 4 13 14
Table H 114 83 4 16 17
Table J 114 83 4 16 17
ANSI B16.5 ANSI 150 89 60 4 13 16
ANSI 300 95 67 4 13 16
ANSI 600 95 67 4 13 16
ANSI 900 121 83 4 19 22
ANSI 1500 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 80 55 4 M10 11
PN10 95 65 4 M12 14
PN16 95 65 4 M12 14
PN20 90 60.5 4 M14 16
PN25 95 65 4 M12 14
PN40 95 65 4 M12 14

Which Pressure Rating Of A182 Grade F316 Flange Is Suitable For The Marine Applications?

The marine applications require high corrosion resistant material. The 316 Stainless Steel Pipe Flanges are of high corrosion resistant material. The pressure ratings depend on the depth at which the applications are going to be used. The SS 316 Flanges can range from 150 to 2500 class of pressure ratings. In shallow and surface water usually the flanges under class 400 are used. In deep sea applications the high pressure classes up to 2500 could be used. The depths, the pressure ratings and diameters could be chosen based on different property tables such as BS 10 table D and Table E.