Alloy 625 Blind, Slip on Flange and ASTM B564 UNS N06625 Flanges manufacturer in India

Just like Inconel 600, alloy 625 is a nonmagnetic material as well. The primary focus of this alloy is its corrosion resistance behaviour. Not only is the UNS N06600 Alloy 625 Flanges resistant to oxidation, but this nickel-base alloy functions well at elevated temperatures. In fact, its properties remain unchanged over an extensive temperature range. The Inconel 625 Weld Neck flanges have high tensile strength and toughness that falls between a range that extends between cryogenic to 2000°F. This property if the alloy has been derived largely from the solid solution strengthening effects. During the solution strengthening of the Werkstoff No. 2.4816 Alloy 625 Blind Flange the material makes use of refractory metals, such as columbium and molybdenum, which is then stiffened in its nickel-chromium matrix. Nickel based ASTM B564 Inconel 625 Slip on Flanges demonstrates excellent fatigue strength. And like most Inconel alloys, this material too is resistant to stress related corrosion cracking to chloride ions. The main applicants of Alloy 625 Forging Flanges include industries like marine and petroleum industries. Other advantages of using the Inconel 625 Flanges involves high fracture toughness as well as fabricability.

Inconel 625 Flanges

Alloy 625 Forging Flanges

Inconel 625 Slip on Flanges

UNS N06625 Flange

Werkstoff 2.4816 BLRF Flanges

Alloy 625 Flanges Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 625 | 0.10 maximum | 0.50 maximum | 0.50 maximum | 0.015maximum | – | 5.0 maximum | 58.0 min | 20.0 – 23.0 |
Inconel 625 Slip on Flanges Mechanical Strength
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Equivalent Of ASME B16.5 Alloy 625 Flanges, Buy Nickel Alloy 625 Forgings Flanges At Lower Prices Compared To USA & UK, Specification List Of Inconel 625 NPT Flanges.
Equivalent Of Inconel 625 Flanges
STANDARD | WERKSTOFF NR. | BS | GOST | EN | UNS | JIS |
Inconel 625 | 2.4856 | N06625 | NA 21 | ХН75МБТЮ | NiCr23Fe | NCF 625 |
Manufacturer Of UNS N06600 Flanges In India, Accept All Large And Small Orders Of Alloy 625 Blind Flange, Contact US for ASTM B564 Inconel 625 SORF Flanges.
Types Of Nickel Alloy 625 Forgings Flanges

4 Inch, SCH 20, 600#, RF, Inconel 625 Blind Flange

8 Inch, DN 100, SCH 60, 600#, RF, Alloy 625 Blind Flange

10 Inch, SCH 120, Class 600, RF, ASME B16.5, ASTM B564 Blind flange

6 Inch, Class 150, RF End, UNS N06625 Blind Flange

8 Inch, SCH 120, 300LB, ASME B16.5, UNS N06625 Slip-on Flange

10 Inch, EN 1092-1, SCH 80, DN200, PN16, Inconel 625 Slip On Flange

6 Inch, 150#, ASME B16.5, Alloy 625 Slip On Flange

20 Inch, 300LB, RF, ASTM B564 Inconel 625 Slip on Flange

26 Inch, SCH 20, Class 600, ASME B16.5, Inconel 625 WN Flange

14 Inch, SCH STD, UNS N06625 Weld Neck Flange

28 Inch, 600#, Alloy 625 WN Flange

2 Inch, ASME B16.5, 150#, RF, ASTM B564 Inconel 625 WN Flange
UNS N06625 Flanges Specification Format
Specification: | Inconel 625 Flanges |
---|---|
Pressure Rating ANSI | 2500 LBS, Class 150 LBS, 900 LBS, 1500 LBS, 300 LBS, 600 LBS |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
Most common types of Flange | Forged / Threaded / Screwed / Plate |
Connect Type/ Flange Face Type | Raised Face (RF) Flanges, Large Tongue & Groove Flanges, Flat Face (FF) Flanges, Large Male-Female (LMF) Flanges, Groove Flanges, Lap-Joint Face (LJF) Flanges, Small Male-Female (SMF) Flanges, Small Tongue Flanges, Ring Type Joint (RTJ) Flanges |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
EN | 10Bar 16Bar 6Bar 25Bar 40Bar |
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Cold and Hot Dip Galvanized, Yellow Transparent, |
Production technique |
|
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
Standards | JIS B2220, BS 1042, ASME B16.47A/B, MSS SP44, EN-1092, EN, ISO 70051, B16.48, ASME/ANSI B16.5, BS1560-3.1, BS 10, API7S-15, B16.47 Series A & B, BS, API 590, ASME B16.36, DIN, GOST, BS 4504, API 6A, API7S-43, API 605, EN 1092-1, DIN |
Size Chart | 1/2" to 48" |
Refer Werkstoff No. 2.4816 Flanges Dimensions with Tolerances, ANSI B16.5 Inconel 625 RTJ Flanges Suppliers In India, We Provide B564 Inconel 625 Weld Neck Flanges Expert Cutting Service in Mumbai, India.
ASTM B564 Inconel 625 Blind Flange Dimensions Chart According to ASME B16.5
CLASS | Normal Size Of Pipe | Alloy 625 SORF Flange | Alloy 625 NPT Flange | Alloy 625 SW Flange | Alloy 625 Loose Flange | Alloy 625 BLRF Flange | Alloy 625 WN Flange |
---|---|---|---|---|---|---|---|
150# | ½ | 1 | 1 | 2 | 1 | 2 | 2 |
¾ | 2 | 2 | 2 | 2 | 2 | 2 | |
1 | 2 | 2 | 2 | 2 | 2 | 3 | |
1¼ | 3 | 3 | 3 | 3 | 3 | 3 | |
1½ | 3 | 3 | 3 | 3 | 4 | 4 | |
2 | 5 | 5 | 5 | 5 | 5 | 6 | |
2½ | 8 | 8 | 8 | 8 | 7 | 10 | |
3 | 9 | 9 | 9 | 9 | 9 | 11.5 | |
3½ | 11 | 12 | 11 | 11 | 13 | 12 | |
4 | 13 | 13 | 13 | 13 | 17 | 16.5 | |
5 | 15 | 15 | 15 | 15 | 20 | 21 | |
6 | 19 | 19 | 19 | 19 | 27 | 26 | |
8 | 30 | 30 | 30 | 30 | 47 | 42 | |
10 | 43 | 43 | 43 | 43 | 70 | 54 | |
12 | 64 | 64 | 64 | 64 | 123 | 88 | |
14 | 90 | 90 | 90 | 105 | 140 | 114 | |
16 | 106 | 98 | 98 | 140 | 180 | 140 | |
18 | 130 | 130 | 130 | 160 | 220 | 165 | |
20 | 165 | 165 | 165 | 195 | 285 | 197 | |
22 | 185 | 185 | 185 | 245 | 355 | 225 | |
24 | 220 | 220 | 220 | 275 | 430 | 268 | |
CLASS | Normal Size Of Pipe | Alloy 625 SORF Flanges | Alloy 625 NPT Flanges | Alloy 625 SW Flanges | Alloy 625 Loose Flanges | Alloy 625 BLRF Flanges | Alloy 625 WN Flanges |
300# | ½ | 2 | 2 | 3 | 2 | 2 | 2 |
¾ | 3 | 3 | 3 | 3 | 3 | 3 | |
1 | 3 | 3 | 3 | 3 | 4 | 4 | |
1¼ | 4.5 | 4.5 | 4 | 4.5 | 6 | 5 | |
1½ | 6.5 | 6.5 | 6 | 6.5 | 7 | 7 | |
2 | 7 | 7 | 7 | 7 | 8 | 9 | |
2½ | 10 | 10 | 10 | 10 | 12 | 12 | |
3 | 13 | 14 | 13 | 14.5 | 16 | 18 | |
3½ | 17 | 17 | 17 | 17 | 21 | 20 | |
4 | 23.5 | 24 | 22 | 24 | 28 | 26.5 | |
5 | 29 | 31 | 28 | 28 | 37 | 36 | |
6 | 39 | 39 | 39 | 39 | 50 | 45 | |
8 | 58 | 58 | 58 | 58 | 81 | 69 | |
10 | 81 | 81 | 81 | 91 | 124 | 100 | |
12 | 115 | 115 | 115 | 140 | 185 | 142 | |
14 | 165 | 165 | 165 | 190 | 250 | 206 | |
16 | 210 | 220 | 190 | 234 | 315 | 250 | |
18 | 253 | 280 | 250 | 305 | 414 | 320 | |
20 | 315 | 325 | 315 | 375 | 515 | 400 | |
22 | 370 | 370 | 370 | 435 | 640 | 465 | |
24 | 490 | 490 | 475 | 550 | 800 | 580 | |
CLASS | Normal Size Of Pipe | Alloy 625 SORF Flanges | Alloy 625 NPT Flanges | Alloy 625 SW Flanges | Alloy 625 Loose Flanges | Alloy 625 BLRF Flanges | Alloy 625 WN Flanges |
600# | ½ | 2 | 2 | 2 | 2 | 3 | 3 |
¾ | 3 | 3 | 3 | 3 | 4 | 4 | |
1 | 4 | 4 | 4 | 4 | 4 | 4 | |
1¼ | 5 | 5 | 5 | 5 | 6 | 6 | |
1½ | 7 | 7 | 7 | 7 | 8 | 8 | |
2 | 9 | 9 | 9 | 9 | 10 | 12 | |
2½ | 13 | 13 | 13 | 12 | 15 | 18 | |
3 | 16 | 16 | 16 | 15 | 20 | 23 | |
3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
4 | 37 | 37 | 37 | 36 | 41 | 42 | |
5 | 63 | 63 | 63 | 63 | 68 | 68 | |
6 | 80 | 80 | 80 | 78 | 86 | 81 | |
8 | 115 | 15 | 15 | 112 | 140 | 120 | |
10 | 177 | 177 | 177 | 195 | 231 | 190 | |
12 | 215 | 215 | 215 | 240 | 295 | 226 | |
14 | 259 | 259 | 259 | 290 | 378 | 347 | |
16 | 366 | 366 | 366 | 400 | 527 | 481 | |
18 | 476 | 476 | 476 | 469 | 665 | 555 | |
20 | 612 | 612 | 612 | 604 | 855 | 690 | |
22 | 590 | 590 | 590 | 670 | 1000 | 720 | |
24 | 876 | 876 | 876 | 866 | 1250 | 977 |
We Maintain Good Quality Stock Of Inconel 625 Orifice Flanges, Inconel 625 Flanges Temperature Ratings, Nickel Alloy N06600 Socket Weld Flanges Order Custom Sizes Online.
Werkstoff No. 2.4816 Flanges Pressure Table
Temperature °F | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
-20 to 100 | 275 | 720 | 960 | 1440 | 2160 | 3600 | 6000 |
200 | 230 | 600 | 800 | 1200 | 1800 | 3000 | 5000 |
300 | 205 | 540 | 720 | 1080 | 1620 | 2700 | 4500 |
400 | 190 | 495 | 660 | 995 | 1490 | 2485 | 4140 |
500 | 170 | 465 | 620 | 930 | 1395 | 2330 | 3880 |
600 | 140 | 435 | 580 | 875 | 1310 | 2185 | 3640 |
650 | 125 | 430 | 575 | 860 | 1290 | 2150 | 3580 |
700 | 110 | 425 | 565 | 850 | 1275 | 2125 | 3540 |
750 | 95 | 415 | 555 | 830 | 1245 | 2075 | 3460 |
800 | 80 | 405 | 540 | 805 | 1210 | 2015 | 3360 |
850 | 65 | 395 | 530 | 790 | 1190 | 1980 | 3300 |
900 | 50 | 390 | 520 | 780 | 1165 | 1945 | 3240 |
950 | 35 | 380 | 510 | 765 | 1145 | 1910 | 3180 |
1000 | 20 | 320 | 430 | 640 | 965 | 1605 | 2675 |
1050 | 20 | 310 | 410 | 615 | 925 | 1545 | 2570 |
1100 | 20 | 255 | 345 | 515 | 770 | 1285 | 2145 |
1150 | 20 | 200 | 265 | 400 | 595 | 995 | 1655 |
1200 | 20 | 155 | 205 | 310 | 465 | 770 | 1285 |
1250 | 20 | 115 | 150 | 225 | 340 | 565 | 945 |
1300 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
1350 | 20 | 60 | 80 | 125 | 185 | 310 | 515 |
1400 | 20 | 50 | 65 | 95 | 145 | 240 | 400 |
1450 | 15 | 35 | 45 | 70 | 105 | 170 | 285 |
1500 | 10 | 25 | 35 | 55 | 80 | 135 | 230 |
ANSI B16.5 Inconel 625 RTJ Flanges Schedule Chart
Standard | Class | Dia. | Bolt Circle Dia. | Number of Bolts | Bolt Size | Dia. of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 | |
Inconel 600 Flanges manufacturers in India |