Equivalent Of ASME B16.11 Forged Carbon Steel Pipe Fittings, High CS Forged Elbow Temperature Ratings.
Forging improves several mechanical properties when performed on carbon steel alloys. Two of the most important properties impacted by forging the Forged Carbon Steel Pipe Fittings includes a significant improvement on its impact strength as well as fatigue resistance. Usually, forged products have good ductility as well. Carbon steels, unlike stainless steel grades, have little to no ductility. With a forging process, Carbon Steel Forged Fittings have some added ductility in the products and could be useful in applications where moderate ductility is a requirement. Though relatively inexpensive, and preferred by many businesses, Carbon Steel Threaded Coupling is an advantage in areas where the piping systems carry across highly combustible fluids. Threading is a permanent method of joining where the application may either have space constraints or if using welding to join these fittings is not considered ideal. Forging not only improves the structural strength of the CS Forged Threaded Pipe Nipples, but it also provides a superior or a better chemical uniformity, making for a smoother surface area and better grain flow in the microstructure. The alloy of Forged Carbon Steel Equal Tee are dense and because the microstructure is aligned in an orderly fashion, these fittings are not porous. Porosity is detrimental if unchecked in piping systems, particularly in the transportation of gas. Therefore, low porosity and inexpensive CS Forged Elbow is ideally used in the oil and gas industry.
Carbon Steel Forged Fittings
ASME B16.11 Forged Carbon Steel Pipe Fittings
Black Carbon Steel Threaded Coupling
Fully Killed Carbon Steel Socket Weld Forged Tee
Galvanized Carbon Steel Forged Street Elbow
ANSI B16.11 Forged Carbon Steel 90 Deg Elbow
Equivalent Of Forged Carbon Steel Pipe Fittings
| Class Of Fitting | Connection Of Fitting | Equivalent Of Pipe | |
|---|---|---|---|
| Sch No. | Wall Designation | ||
|
2000
|
Carbon Steel NPT Fittings
|
Sch. 80
|
XS
|
|
3000
|
CS Threaded Fittings
|
Sch. 160
|
–
|
|
6000
|
Carbon Steel Threaded Fittings
|
–
|
XXS
|
|
3000
|
Forged Socket Weld Fittings
|
Sch. 80
|
XS
|
|
6000
|
Carbon Steel SW Fittings
|
Sch. 160
|
–
|
|
9000
|
Carbon Steel Socket Weld Fittings
|
–
|
XXS
|
High CS Forged Elbow Temperature Ratings
| Fittings | Size | |
|---|---|---|
| CS Forged 90° Elbows | CS Socket Couplings | Sizes 1/8″ – 4″ Fittings Pressure Ratings – 2000 Class, 3000 Class, 6000 Class, 9000 Class |
| CS Threaded 45° Elbows | CS NPT Reducers | |
| CS Forged Street Elbows | CS SW Inserts | |
| CS NPT Tees | CS Forged Caps | |
| CS Socket Crosses | CS NPT Unions | |
Contact Us For Medium CS Forged Fitting Instant Delivery In India, Compare Prices Before You Buy Black Carbon Steel Threaded Coupling, Spec Chart Of Fully Killed Carbon Steel Socket weld Forged Tee.
CS Forged Fitting Specification List
| Specification | ASME B16.11 Carbon Steel Forged Fittings |
| MSS SP-43 | Corrosion Resistant Applications, Wrought and Fabricated Butt-Welding Fittings for Low Pressure |
| BS3799 | Specification of screwed and Socket-welding, Steel pipe fittings |
| ASTM A182 – ASME SA182 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| ASME B16.11 | Wrought Buttwelding Fittings |
| ASME B16.11 | Socket – Welding and Threaded Forged Fittings |
| MSS SP-95 | Bull Plugs & Swage(d) Nipples |
Global Suppliers of Galvanized Carbon Steel Forged Street Elbow, Galvanised Carbon Steel Socket weld Reducing Insert Dimensions Chart According to ASME B16.11, We Maintain Good Quality Stock Of Forged Carbon Steel Equal Tee In India.
Carbon Steel Threaded Fittings Dimension Chart
Chemical Structure Of Killed Carbon Steel Forged Threaded Pipe Nipples, We Provide Plain CS Forged Full Cap Expert Cutting Service, Buy Directly From Low Carbon Steel Forged 45 Deg Elbows.
CS Socket Weld Fittings Chemical Analysis
| Element | Composition %, Note C |
|---|---|
| Carbon | .35 max |
| Manganese | .60-1.05 |
| Phosphorus | .035 max |
| Sulfur | .040 max |
| Silicon | .10-35 |
| Copper | .40 max, note A |
| Nickel | .40 max, note A |
| Chromium | .30 max, note A,B |
| Molybdenum | .12 max, note A,B |
| Vanadium | .08 max, note A |
Mechanical Behavior Of Fully Killed Carbon Steel Forged Half Coupling, ASME B16.11 Carbon Steel Forged Fittings Price List in Mumbai.
ASME B16.11 Forged Carbon Steel Equal Tee Mechanical Strength
|
Property |
|
|---|---|
|
Tensile Strength, minimum: |
70,000 psi (485 MPa] |
|
Minimum. Yield Point: |
36,000 psi [250 MPa] |
|
Reduction of area, minimum: |
30% minimum |
|
Hardness, HB, maximum |
187 |
Types Of Low Carbon Steel NPT Fittings
3/4 Inch, 3000#, ANSI B16.11, NPT ASTM Forged Cap Fittings
2/4 Inch, 9000#, DN20, PN400, Threaded NPT Cap
2 to 14 Inch, 75 LB, CS Dresser Coupling Fittings
2 7/8 Inch EU X 2 Inch, LP, CS Casing Coupling
1/2 Inch, 90 DEG, Class 3000, NPT Screwed Elbow
1 1/2 Inch, Class 3000, ASME B16.11, Threaded 90 Deg Eblow
2×2 Inch, 2000 LB, FNPT, ASME B16.11, Forged Threaded Tee
CL3000, DN25, NPT, Carbon Steel Equal Tee Fittings
3/4 Inch, 3000 LB, MSS-SP-83, NPT, Forged Threaded Female Union
1/4 Inch, JIC x NPT, 6000 PSI, Carbon Steel Male Hex Nipple
2 Inch, MSS-SP-83, NPT End, 3000#, ASTM CS Pipe Union Fittings
2x1-1/2 In, 3000 SCRD, A105, NPT, Carbon Steel Bushing
3/4 Inch, 3000 SCRD, ASTM CS Galvanized Pipe Union
1-1/2 Inch, 3000 SCRD, Carbon Steel Union Fittings
2 X 1 Inch, ASTM A105, NPT, CS Hexagon Bushing
3 X 4 Inch, SCH.STD, NPT, Black Seamless Nipple Pipe
Available Types Of Black Steel SW Fittings
2 X 1-1/2 Inch, 3000 LB, Carbon Steel SW Reducing Tee Fittings
2 Inch, ASME B16.11, CL3000, CS SW Equal Tee Fittings
2 Inch x 2 Inch, 2000 LB, Carbon Steel Socket Weld Tee
1/2 Inch, 6000 LB, CS Socket Weld Equal Tee
1 Inch, CL6000, CS SW 90 Deg Elbow Fittings
2 Inch, Class 3000, Carbon Steel SW 45 Degree Elbow
PN 20, SW Ends, CS Galvanized Concentric Reducer
6 X 3 Inch, 9000#, CS SW Eccentric Reducer
MSS-SP-95, SCH 80, SW, Concentric Nipple Swage
2 X 1 1/2 Inch, SCH 160, 3000#, Carbon Steel Swage Nipple Eccentric
3/8 Inch, SW, SCH XH, ASTM CS Bull Plug
1/2 X 3 Inch, SCH 40, CS Threaded Both Ends Nipples
3/4 Inch, Class 3000, MSS-SP-83, ASTM Carbon Steel Pipe Union
2/3 Inch, 3000#, SW, MSS-SP-83, Low Carbon Pipe Union Fittings
2 X 6 Inch, 3000#, SCH 40, Hight Steel CS Nipple
3/4 Inch, 3000 SCRD, CS Galvanized Pipe Union
Forged Threaded Pipe Nipples Weight Chart
| Normal Pipe Size | Type A | Type B | QTY | Weight Table |
|---|---|---|---|---|
| ¼ | 0.81 | 0.88 | 160 | 0.20 |
| ⁄ | 0.97 | 1.00 | 130 | 0.26 |
| ½ | 1.12 | 1.31 | 100 | 0.57 |
| ¾ | 1.31 | 1.5 | 75 | 0.71 |
| 1 | 1.5 | 1.81 | 40 | 1.08 |
| 1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
| 1 ½ | 2.00 | 2.44 | 18 | 2.38 |
| 2 | 2.38 | 2.97 | 10 | 3.55 |
| 2 ½ | 3.00 | 3.62 | 4 | 6.22 |
| 3 | 3.38 | 4.31 | 2 | 10.36 |
| 4 | 4.19 | 5.75 | 1 | 23.91 |
Plain Carbon Steel Forged Cap Size Chart
| Description | Class Designation | ||
|---|---|---|---|
| 3000# Fittings | 6000# Fittings | 9000# Fittings | |
| SW Elbow 45 & CS 90 deg SW Tee, SW Crosse, NPT Coupling, Half-Coupling, NPT End or NPT Pipe Caps |
½ - 4 | ½ - 2 | ½ - 2 |
| ½ - 4 | ½ - 2 | ½ - 2 | |
| ½ - 4 | ½ - 2 | ½ - 2 | |
| Normal Size Of Pipe by Wall Thick. |
SCH 80 & XS | SCH 160 | XXS |
Manufacturing Standards Of Low Carbon Steel Forged 45 Deg Elbows
| MSS SP-43 | Corrosion Resistant Applications, Fabricated and Wrought Butt-Welding Fittings for Low Pressure |
| MSS SP-95 | Bull Plugs & Swage(d) Nipples |
| BS3799 | Specification of screwed and Socket-welding, Steel pipe fittings |
| ASTM A182 – ASME SA182 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| ASME B16.9 | Wrought Buttwelding Fittings |
| ASME B16.11 | Socket – Welding and Threaded, Forged Fittings |
