Check ASTM A182 F904L Blind / Slip On / Weld Neck / Socket Weld Flange Chemical Composition And Mechanical Properties
What is the difference between Stainless Steel 904L RF and FF flange?
Stainless steel 904L flanges are non-stabilized austenitic grade components. The low carbon grade flanges are available as RF or FF flanges.
- A 904L RF flange can be recognized due to its gasket surface area that is positioned above the line of bolting. A FF flange has a similar height to the bolting line in the flange.
- A Raised face flange helps in concentrating more pressure on the mating flanges to increase the strength of the seal. A flat face flange is generally used for mating low-pressure components.
- A flat face flange utilizes full flat gaskets which are generally of the soft type, while raised face flanges are compatible with different types of gaskets.
Do 904L Stainless Steel flanges have schedules?
A schedule is a standard that helps in measuring the thickness of a flange. 904L is designed in a range of schedules. These schedules help the flange in determining the pressure holding capacity of the component coupled with its strength as there is a temperature rise. This range of flanges are available in schedules of 10, 20, 30, 40, 60, 80, 100, 120, 140, and 160. Schedules between SCH 10-30 are low strength components, SCH 40-60 are standard walled flanges, while Stainless Steel 904L Flanges between SCH 80 to SCH 160 are heavy duty flanges. Special flanges above schedule 160 can be designed which possess extra strength and durability.
ASTM A182 F904L long weld neck flange vs weld neck flange
904L Stainless Steel Weld neck flange is a robust module and is used in high volatile applications in the piping industry. A SS 904L long weld neck flange is a modified version of the weld neck flange, which has similarities with it but can be differentiated based on certain features.
- A weld neck flange has a long protruded hub or face. A long weld neck flange has an extended neck compared to the latter, which is utilized as a boring extension.
- SS 904L Weld neck flanges are widely utilized in high-pressure applications. Long weld neck flanges are utilized in high pressure as well as high temperature systems.
- ASTM A182 F904L long weld neck flange has a square cut on its neck and not a schedule bore as seen on weld neck flanges.

Stainless Steel 904L Flanges

ASTM A182 F904L Blind Flange

UNS N08904 Lap Joint Flanges

Stainless Steel 904L Flanges Dimensions
Standard Of SS 904L Flanges | |||||||
---|---|---|---|---|---|---|---|
CLASS | NPS | ASTM A182 904L SORF Flanges | ASTM A182 904L NPT Flanges | ASTM A182 904L SW Flanges | ASTM A182 904L Loose Flanges | ASTM A182 904L BLRF Flanges | ASTM A182 904L WN Flanges |
150# | ½ | 1 | 1 | 2 | 1 | 2 | 2 |
¾ | 2 | 2 | 2 | 2 | 2 | 2 | |
1 | 2 | 2 | 2 | 2 | 2 | 3 | |
1¼ | 3 | 3 | 3 | 3 | 3 | 3 | |
1½ | 3 | 3 | 3 | 3 | 4 | 4 | |
2 | 5 | 5 | 5 | 5 | 5 | 6 | |
2½ | 8 | 8 | 8 | 8 | 7 | 10 | |
3 | 9 | 9 | 9 | 9 | 9 | 11.5 | |
3½ | 11 | 12 | 11 | 11 | 13 | 12 | |
4 | 13 | 13 | 13 | 13 | 17 | 16.5 | |
5 | 15 | 15 | 15 | 15 | 20 | 21 | |
6 | 19 | 19 | 19 | 19 | 27 | 26 | |
8 | 30 | 30 | 30 | 30 | 47 | 42 | |
10 | 43 | 43 | 43 | 43 | 70 | 54 | |
12 | 64 | 64 | 64 | 64 | 123 | 88 | |
14 | 90 | 90 | 90 | 105 | 140 | 114 | |
16 | 106 | 98 | 98 | 140 | 180 | 140 | |
18 | 130 | 130 | 130 | 160 | 220 | 165 | |
20 | 165 | 165 | 165 | 195 | 285 | 197 | |
22 | 185 | 185 | 185 | 245 | 355 | 225 | |
24 | 220 | 220 | 220 | 275 | 430 | 268 | |
CLASS | NPS | SORF | NPT Flanges | SW | Loose | BLRF | WN |
300# | ½ | 2 | 2 | 3 | 2 | 2 | 2 |
¾ | 3 | 3 | 3 | 3 | 3 | 3 | |
1 | 3 | 3 | 3 | 3 | 4 | 4 | |
1¼ | 4.5 | 4.5 | 4 | 4.5 | 6 | 5 | |
1½ | 6.5 | 6.5 | 6 | 6.5 | 7 | 7 | |
2 | 7 | 7 | 7 | 7 | 8 | 9 | |
2½ | 10 | 10 | 10 | 10 | 12 | 12 | |
3 | 13 | 14 | 13 | 14.5 | 16 | 18 | |
3½ | 17 | 17 | 17 | 17 | 21 | 20 | |
4 | 23.5 | 24 | 22 | 24 | 28 | 26.5 | |
5 | 29 | 31 | 28 | 28 | 37 | 36 | |
6 | 39 | 39 | 39 | 39 | 50 | 45 | |
8 | 58 | 58 | 58 | 58 | 81 | 69 | |
10 | 81 | 81 | 81 | 91 | 124 | 100 | |
12 | 115 | 115 | 115 | 140 | 185 | 142 | |
14 | 165 | 165 | 165 | 190 | 250 | 206 | |
16 | 210 | 220 | 190 | 234 | 315 | 250 | |
18 | 253 | 280 | 250 | 305 | 414 | 320 | |
20 | 315 | 325 | 315 | 375 | 515 | 400 | |
22 | 370 | 370 | 370 | 435 | 640 | 465 | |
24 | 490 | 490 | 475 | 550 | 800 | 580 | |
CLASS | NPS | SORF | NPT Flanges | SW | Loose | BLRF | WN |
400# | ½ | 2 | 2 | 2 | 2 | 2 | 3 |
¾ | 3 | 3 | 3 | 3 | 3 | 3.5 | |
1 | 3.5 | 3.5 | 3.5 | 3.5 | 4 | 4 | |
1¼ | 4.5 | 4.5 | 4.5 | 4.5 | 6 | 4.5 | |
1½ | 6.5 | 6.5 | 6.5 | 6.5 | 8 | 8 | |
2 | 8 | 8 | 8 | 8 | 10 | 10 | |
2½ | 12 | 12 | 12 | 11 | 15 | 14 | |
3 | 15 | 15 | 15 | 14 | 20 | 18 | |
3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
4 | 26 | 26 | 26 | 25 | 33 | 35 | |
5 | 31 | 31 | 31 | 29 | 44 | 43 | |
6 | 44 | 44 | 44 | 42 | 61 | 57 | |
8 | 67 | 67 | 67 | 64 | 100 | 89 | |
10 | 91 | 91 | 91 | 110 | 155 | 125 | |
12 | 130 | 130 | 130 | 152 | 226 | 175 | |
14 | 191 | 191 | 191 | 210 | 310 | 233 | |
16 | 253 | 253 | 253 | 280 | 398 | 295 | |
18 | 310 | 310 | 310 | 345 | 502 | 360 | |
20 | 378 | 378 | 378 | 420 | 621 | 445 | |
22 | 405 | 405 | 405 | 455 | 720 | 505 | |
24 | 539 | 539 | 539 | 615 | 936 | 640 | |
CLASS | NPS | SORF | NPT Flanges | SW | Loose | BLRF | WN |
600# | ½ | 2 | 2 | 2 | 2 | 3 | 3 |
¾ | 3 | 3 | 3 | 3 | 4 | 4 | |
1 | 4 | 4 | 4 | 4 | 4 | 4 | |
1¼ | 5 | 5 | 5 | 5 | 6 | 6 | |
1½ | 7 | 7 | 7 | 7 | 8 | 8 | |
2 | 9 | 9 | 9 | 9 | 10 | 12 | |
2½ | 13 | 13 | 13 | 12 | 15 | 18 | |
3 | 16 | 16 | 16 | 15 | 20 | 23 | |
3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
4 | 37 | 37 | 37 | 36 | 41 | 42 | |
5 | 63 | 63 | 63 | 63 | 68 | 68 | |
6 | 80 | 80 | 80 | 78 | 86 | 81 | |
8 | 115 | 15 | 15 | 112 | 140 | 120 | |
10 | 177 | 177 | 177 | 195 | 231 | 190 | |
12 | 215 | 215 | 215 | 240 | 295 | 226 | |
14 | 259 | 259 | 259 | 290 | 378 | 347 | |
16 | 366 | 366 | 366 | 400 | 527 | 481 | |
18 | 476 | 476 | 476 | 469 | 665 | 555 | |
20 | 612 | 612 | 612 | 604 | 855 | 690 | |
22 | 590 | 590 | 590 | 670 | 1000 | 720 | |
24 | 876 | 876 | 876 | 866 | 1250 | 977 | |
CLASS | NPS | SORF | NPT Flanges | SW | Loose | BLRF | WN |
900# | ½ | 6 | 6 | 6 | 6 | 4 | 7 |
¾ | 6 | 6 | 6 | 6 | 6 | 7 | |
1 | 7.5 | 7.5 | 7.5 | 7.5 | 9 | 8.5 | |
1¼ | 10 | 10 | 10 | 10 | 10 | 10 | |
1½ | 14 | 14 | 14 | 14 | 14 | 14 | |
2 | 22 | 22 | 22 | 21 | 25 | 24 | |
2½ | 31 | 31 | 31 | 25 | 32 | 31 | |
3 | 36 | 36 | 36 | 29 | 35 | 36 | |
4 | 53 | 53 | 53 | 51 | 54 | 53 | |
5 | 83 | 83 | 83 | 81 | 87 | 86 | |
6 | 110 | 110 | 110 | 105 | 115 | 110 | |
8 | 172 | 172 | 172 | 190 | 200 | 187 | |
10 | 245 | 245 | 245 | 277 | 290 | 268 | |
12 | 326 | 326 | 326 | 371 | 415 | 372 | |
14 | 400 | 400 | 400 | 415 | 520 | 562 | |
16 | 459 | 459 | 459 | 488 | 619 | 685 | |
18 | 647 | 647 | 647 | 670 | 880 | 924 | |
20 | 792 | 792 | 792 | 868 | 1107 | 1164 | |
24 | 1480 | 1480 | 1480 | 1659 | 2099 | 2107 | |
CLASS | NPS | SORF | NPT Flanges | SW | Loose | BLRF | WN |
1500# | ½ | 6 | 6 | 6 | 6 | 4 | 7 |
¾ | 6 | 6 | 6 | 6 | 6 | 7 | |
1 | 8 | 8 | 8 | 8 | 9 | 9 | |
1¼ | 10 | 10 | 10 | 10 | 10 | 10 | |
1½ | 14 | 14 | 14 | 14 | 14 | 14 | |
2 | 25 | 25 | 25 | 25 | 25 | 25 | |
2½ | 36 | 36 | 36 | 35 | 35 | 36 | |
3 | 48 | 48 | 48 | 47 | 48 | 48 | |
4 | 73 | 73 | 73 | 75 | 73 | 73 | |
5 | 132 | 132 | 132 | 140 | 140 | 132 | |
6 | 165 | 165 | 165 | 170 | 160 | 165 | |
8 | 260 | 260 | 260 | 286 | 302 | 275 | |
10 | 436 | 436 | 436 | 485 | 510 | 455 | |
12 | 667 | 667 | 667 | 749 | 775 | 690 | |
14 | 940 | 940 | 940 | 890 | 975 | 940 | |
16 | 1250 | 1250 | 1250 | 1250 | 1300 | 1250 | |
18 | 1625 | 1625 | 1625 | 1475 | 1750 | 1625 | |
20 | 2050 | 2050 | 2050 | 1775 | 2225 | 2050 | |
24 | 2825 | 2825 | 2825 | 2825 | 3625 | 3325 | |
CLASS | NPS | SORF | NPT Flanges | SW | Loose | BLRF | WN |
2500# | ½ | …. | 7 | …. | 7 | 7 | 8 |
¾ | …. | 9 | …. | 8 | 10 | 9 | |
1 | …. | 12 | …. | 12 | 12 | 13 | |
1¼ | …. | 18 | …. | 17 | 18 | 20 | |
1½ | …. | 25 | …. | 24 | 25 | 28 | |
2 | …. | 38 | …. | 37 | 39 | 42 | |
2½ | …. | 55 | …. | 53 | 56 | 52 | |
3 | …. | 83 | …. | 80 | 86 | 94 | |
4 | …. | 127 | …. | 122 | 133 | 146 | |
5 | …. | 210 | …. | 204 | 223 | 244 | |
6 | …. | 323 | …. | 314 | 345 | 378 | |
8 | …. | 485 | …. | 471 | 533 | 576 | |
10 | …. | 925 | …. | 897 | 1025 | 1068 | |
12 | …. | 1300 | …. | 1262 | 1464 | 1608 |
ASTM A182 F904l Flange Weight Chart
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
SA182 F904L Temperature Table
ANSI/ASME B16.34 | ANSI PRESSURE RATING | ||||||
Temperature °F | 150LB | 300LB | 400LB | 600LB | 900LB | 1500LB | 2500LB |
-20 to 100 | 275 | 720 | 960 | 1440 | 2160 | 3600 | 6000 |
200 | 230 | 600 | 800 | 1200 | 1800 | 3000 | 5000 |
300 | 205 | 540 | 720 | 1080 | 1620 | 2700 | 4500 |
400 | 190 | 495 | 660 | 995 | 1490 | 2485 | 4140 |
500 | 170 | 465 | 620 | 930 | 1395 | 2330 | 3880 |
600 | 140 | 435 | 580 | 875 | 1310 | 2185 | 3640 |
650 | 125 | 430 | 575 | 860 | 1290 | 2150 | 3580 |
700 | 110 | 425 | 565 | 850 | 1275 | 2125 | 3540 |
750 | 95 | 415 | 555 | 830 | 1245 | 2075 | 3460 |
800 | 80 | 405 | 540 | 805 | 1210 | 2015 | 3360 |
850 | 65 | 395 | 530 | 790 | 1190 | 1980 | 3300 |
900 | 50 | 390 | 520 | 780 | 1165 | 1945 | 3240 |
950 | 35 | 380 | 510 | 765 | 1145 | 1910 | 3180 |
1000 | 20 | 320 | 430 | 640 | 965 | 1605 | 2675 |
1050 | 20 | 310 | 410 | 615 | 925 | 1545 | 2570 |
1100 | 20 | 255 | 345 | 515 | 770 | 1285 | 2145 |
1150 | 20 | 200 | 265 | 400 | 595 | 995 | 1655 |
1200 | 20 | 155 | 205 | 310 | 465 | 770 | 1285 |
1250 | 20 | 115 | 150 | 225 | 340 | 565 | 945 |
1300 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
1350 | 20 | 60 | 80 | 125 | 185 | 310 | 515 |
1400 | 20 | 50 | 65 | 95 | 145 | 240 | 400 |
1450 | 15 | 35 | 45 | 70 | 105 | 170 | 285 |
1500 | 10 | 25 | 35 | 55 | 80 | 135 | 230 |
A182 F904L Material Specification
Specification: | ASTM A182 Stainless Steel 904L Flanges |
---|---|
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Cold and Hot Dip Galvanized, Yellow Transparent, |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Most common types of Flanges | Forged / Threaded / Screwed / Plate |
Pressure Rating ANSI | 2500 LBS, Class 150 LBS, 900 LBS, 1500 LBS, 300 LBS, 600 LBS |
Production technique |
|
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
Standards | ASME/ANSI B16.5, API 590, ASME B16.47A/B, ASME B16.36, API7S-15, ISO 70051, EN 1092-1, DIN, B16.48, GOST, API7S-43, API 605, API 6A, BS 10, MSS SP44, BS1560-3.1, BS 4504, BS, EN-1092, EN, DIN, JIS B2220, B16.47 Series A & B, BS 1042 |
Connect Type/ Flanges Face Type | Flat Face (FF) Flanges, Large Male-Female (LMF) Flanges, Raised Face (RF) Flanges, Large Tongue & Groove, Groove, Lap-Joint Face (LJF) Flanges, Small Male-Female (SMF) Flanges, Small Tongue Flanges, Ring Type Joint (RTJ) Flanges |
EN | 10Bar 16Bar 6Bar 25Bar 40Bar |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
Size Chart | 1/2" to 48" |
We Provide Different Type Of 904L Stainless Steel Spectacle Blind / Screwed Flanges In Mumbai, India.
Types Of SS 904L Flanges

EN1092-1, PN16, DN200, ASTM A182 F904L Flat Plate Flanges

6 Inch, EN1092-1 Type 01, Class 120, ASTM A182 F904L Plate Flanges

45mm, 1575mm, ASME SA240, SS 904L Plate Flanges

DIN 2576, DN250, PN10, ASTM A182 904L Plate Flanges

150 LB, 1/2 Inch, RF, ASTM A182 F904L Stainless Steel Threaded Flanges

32 Inch, Class 600 LB, WT: 34 MM, Raised Face, ASTM A182 F904L Long WN Flanges

8 Inch, SCH 80, 600 LB, ASTM A182 F904L Weld Neck RF Flanges

2 1/2 Inch, SCH 80S, B16.5, SS Forged ASTM A182 F904L WN Flanges
UNS N08904 Lap Joint And Werkstoff Nr. 1.4539 Groove & Tongue Flanges Dimensions and Specifications.
ASTM A182 F904L Equivalent
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
ASTM B649 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
UNS N08904 Blind Flanges Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
Stainless Steel 904L Flanges | 0.020 maximum | 2 maximum | 1.00 maximum | 0.045 maximum | 0.030 maximum | 19.00 – 23.00 | 4.00 – 5.00 maximum | 23.00 – 28.00 | 1.00 – 2.00 |
Werkstoff Nr. 1.4539 Slip On Flanges Mechanical Properties
Yield Strength 0.2% Offset |
Ultimate Tensile Strength |
Elongation in 2 in. |
Hardness |
||
---|---|---|---|---|---|
psi (min.) |
(MPa) |
psi (min.) |
(MPa) |
% (min.) |
(max.) |
30,000 |
205 |
75,000 |
515 |
40 |
201 Brinell |