Stainless Steel F316 Flanges Manufacturers In India

Stainless Steel 316L Flanges

ASTM A182 Grade F316L Slip On, Weld neck and SA 182 F316L Blind Flange manufacturer in Mumbai, India

The low carbon version of grade 316, these components have a significant increase in weldability. A Nitrogen containing alloy, the mechanical properties of Stainless Steel 316L Flanges are almost at par with grade 316 stainless steel. Similar to most low carbon containing stainless steel alloys grade 316L is less susceptible to getting corroded by means of intergranular corrosion. The absence of higher carbon content in the alloy of ASTM A182 F316L Flange does not foster the formation of carbide precipitates on the grain boundary. Furthermore, these components have no requirement of annealing treatment, unless it has been specified by the buyers purchasing Werkstoff No. 1.4401 316L Stainless Steel Flanges. In this case, the manufacturer is required to perform stress relieving on the parts. These parts could be used in an as welded condition, despite not receiving annealing treatment. In many applications, the use of a UNS S31600 SS 316L Flange offers easy access to a worker for purposes including cleaning, inspection or even modification. Industries such as pharmaceuticals, which require sanitary alloys for the manufacture of their products prefer the use of ASTM A182 F316L Stainless Steel Pipe Flanges. The reason why grade 316L is thought of as sanitary is that it is non-toxic and it does not have a gross effect with the substrates being used in the production of medicines. Additionally, the production of drugs may make use of active ingredients and acidic or alkaline compounds as well. Since ASME B16.5 Sa 182 F316L Slip On Flanges are generally non-reactive to such raw materials, the pharma sector is a primary user of these components.



ASTM A182 F316L Flange Equivalent

Equivalent Of SS 316L Flanges
STANDARD ASTM A182 F316L
WERKSTOFF NR. 1.4404 / 1.4435
GOST 03Ch17N14M3 / 03Ch17N14M2
AFNOR Z3CND17‐11‐02 / Z3CND18‐14‐03
EN X2CrNiMo17-12-2 / X2CrNiMo18-14-3
UNS S31603
JIS SUS 316L
BS 316S11 / 316S13

Werkstoff Nr. 1.4404 Specification Format

Specification: ASTM A182 Stainless Steel 316L Flanges
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Size Chart 1/2" to 48"
Most common types of Flanges Forged / Threaded / Screwed / Plate
Production technique
  • Forged, Heat treated and machined
EN 10Bar 16Bar 6Bar 25Bar 40Bar
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Cold and Hot Dip Galvanized, Yellow Transparent,
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Connect Type/ Flange Face Type Flat Face (FF), Large Male-Female (LMF), Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Ring Type Joint (RTJ)
Pressure Rating ANSI 2500 LBS, Class 150 LBS, 900 LBS, 1500 LBS, 300 LBS, 600 LBS
JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Standards ASME B16.47A/B, MSS SP44, API7S-43, EN-1092, B16.48, DIN, API 590, BS1560-3.1, ISO 70051, ASME B16.36, EN 1092-1, API 605, BS 4504, B16.47 Series A & B, GOST, API7S-15, BS 1042, JIS B2220, ASME/ANSI B16.5, BS 10, DIN, BS, API 6A, EN
Specification Of SS 316L Flanges

Types Of UNS S31600 Pipe Flanges

3 Inch, Class 300, API, A182 F316L Forged Steel Nipoflange

3 Inch, Class 300, API, A182 F316L Forged Steel Nipoflanges

 DIN 2501, PN16, DN50, ANSI, ASTM A182 F316L Flat Flange

DIN 2501, PN16, DN50, ANSI, ASTM A182 F316L Flat Flanges

EN 1092-1, GP240GH, PN16, DN100, F316L Flat Plate Flanges

EN 1092-1, GP240GH, PN16, DN100, F316L Flat Plate Flanges

12 Inch, SCH 80S, Class D, AWWA C207, Forged, F316L Stainless Steel Flange

12 Inch, SCH 80S, Class D, AWWA C207, Forged, F316L Stainless Steel Flanges

10 Inch, 600#, API 590, FF, ASTM A182 F316 Blind Flanges

10 Inch, 600#, API 590, FF, ASTM A182 F316 Blind Flanges

3 inch, PN 16, DN 125, ASTM A182 F316L Plate Flange

3 inch, PN 16, DN 125, ASTM A182 F316L Plate Flanges

8 Inch, SCH 80, ASTM A182 F316L Anchor Flange

8 Inch, SCH 80, ASTM A182 F316L Anchor Flanges

28 Inch, AWWA Class D, ASTM A182 F316L Back Flange

28 Inch, AWWA Class D, ASTM A182 F316L Back Flanges

EN1092-1, PN16, DN200, ASTM A182 F316L Flat Plate Flange

EN1092-1, PN16, DN200, ASTM A182 F316L Flat Plate Flanges

6 Inch, EN1092-1 Type 01, Class 120, ASTM A182 F316L Plate Flange

6 Inch, EN1092-1 Type 01, Class 120, ASTM A182 F316L Plate Flanges

45mm, 1575mm, ASME SA240, SS 316L Plate Flange

45mm, 1575mm, ASME SA240, SS 316L Plate Flanges

DIN 2576, DN250, PN10, ASTM A182 F316L Plate Flange

DIN 2576, DN250, PN10, ASTM A182 F316L Plate Flanges

150 LB, 1/2 Inch, RF, ASTM A182 F316 Stainless Steel Threaded Flange

150 LB, 1/2 Inch, RF, ASTM A182 F316 Stainless Steel Threaded Flanges

32 Inch, Class 600 LB, WT: 34 MM, Raised Face, ASTM A182 F316L Long WN Flange

32 Inch, Class 600 LB, WT: 34 MM, Raised Face, ASTM A182 F316L Long WN Flanges

8 Inch, SCH 80, 600 LB, ASTM A182 F316L Weld Neck RF Flange

8 Inch, SCH 80, 600 LB, ASTM A182 F316L Weld Neck RF Flanges

2 1/2 Inch, SCH 80S, B16.5, SS Forged ASTM A182 F316L WN Flange

2 1/2 Inch, SCH 80S, B16.5, SS Forged ASTM A182 F316L WN Flanges


We Manufacture Special SS 316L Pipe Flanges Size And Custom Shape Stainless Steel 316L Blind Flanges For Our Customers, Chemical Equation Of UNS S31600 SORF Flanges.


316L Stainless Steel Flanges Chemical Chart

Chemical Composition Of SS 316L Flanges
Stainless Steel A182 F316L
Ni 10 – 14
Fe Balance
Cr 16 – 18
P 0.045 max
S 0.030 max
N
Ti
Mo 2 – 3
C 0.10 max
Si 0.75 max
Mn 2 max

Check ASTM A182 Grade F316L Socket Weld Flanges Mechanical Properties, Sa 182 F316L Weld Neck Flanges Physical Properties, Supplier Of Small-quantity Of Werkstoff Nr. 1.4435 Puddle Flange In Mumbai, India.


Mechanical Chart Of SS 316l Pipe Flanges

SS 316L Flanges Mechanical Properties
Gr. Tensile Strength Melting Point Yield Strength (0.2%Offset) Density Elongation
ASTM A182 316L Psi – 75000 , MPa – 515 1399 °C (2550 °F) Psi – 30000 , MPa – 205 8.0 g/cm3 35 %

ASME B16.5 SS 316l Flanges Physical Properties

Physical Properties Of SS 316L Flanges
Density 8.0 g/cm3
Melting Point 1400 °C (2550 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %

JIS SUS 316L Orifice Flange Dimensions with Tolerances And Weight Formula Of ANSI B16.5 316L SS Flanges, RAS provide Stainless Steel 316L Flanges Expert Cutting Service.

A182 Gr F316L SORF Flanges Dimension Table

Dimension Of SS 316L Flanges
CLASS NPS ASTM A182 F316L SORF Flange ASTM A182 F316L NPT Flange ASTM A182 F316L SW Flange ASTM A182 F316L Loose Flange ASTM A182 F316L BLRF Flange ASTM A182 F316L WN Flange
150# ½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
300# ½ 2 2 3 2 2 2
¾ 3 3 3 3 3 3
1 3 3 3 3 4 4
4.5 4.5 4 4.5 6 5
6.5 6.5 6 6.5 7 7
2 7 7 7 7 8 9
10 10 10 10 12 12
3 13 14 13 14.5 16 18
17 17 17 17 21 20
4 23.5 24 22 24 28 26.5
5 29 31 28 28 37 36
6 39 39 39 39 50 45
8 58 58 58 58 81 69
10 81 81 81 91 124 100
12 115 115 115 140 185 142
14 165 165 165 190 250 206
16 210 220 190 234 315 250
18 253 280 250 305 414 320
20 315 325 315 375 515 400
22 370 370 370 435 640 465
24 490 490 475 550 800 580
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
400# ½ 2 2 2 2 2 3
¾ 3 3 3 3 3 3.5
1 3.5 3.5 3.5 3.5 4 4
4.5 4.5 4.5 4.5 6 4.5
6.5 6.5 6.5 6.5 8 8
2 8 8 8 8 10 10
12 12 12 11 15 14
3 15 15 15 14 20 18
21 21 21 20 29 26
4 26 26 26 25 33 35
5 31 31 31 29 44 43
6 44 44 44 42 61 57
8 67 67 67 64 100 89
10 91 91 91 110 155 125
12 130 130 130 152 226 175
14 191 191 191 210 310 233
16 253 253 253 280 398 295
18 310 310 310 345 502 360
20 378 378 378 420 621 445
22 405 405 405 455 720 505
24 539 539 539 615 936 640
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
600# ½ 2 2 2 2 3 3
¾ 3 3 3 3 4 4
1 4 4 4 4 4 4
5 5 5 5 6 6
7 7 7 7 8 8
2 9 9 9 9 10 12
13 13 13 12 15 18
3 16 16 16 15 20 23
21 21 21 20 29 26
4 37 37 37 36 41 42
5 63 63 63 63 68 68
6 80 80 80 78 86 81
8 115 15 15 112 140 120
10 177 177 177 195 231 190
12 215 215 215 240 295 226
14 259 259 259 290 378 347
16 366 366 366 400 527 481
18 476 476 476 469 665 555
20 612 612 612 604 855 690
22 590 590 590 670 1000 720
24 876 876 876 866 1250 977
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
900# ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 7.5 7.5 7.5 7.5 9 8.5
10 10 10 10 10 10
14 14 14 14 14 14
2 22 22 22 21 25 24
31 31 31 25 32 31
3 36 36 36 29 35 36
4 53 53 53 51 54 53
5 83 83 83 81 87 86
6 110 110 110 105 115 110
8 172 172 172 190 200 187
10 245 245 245 277 290 268
12 326 326 326 371 415 372
14 400 400 400 415 520 562
16 459 459 459 488 619 685
18 647 647 647 670 880 924
20 792 792 792 868 1107 1164
24 1480 1480 1480 1659 2099 2107
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
1500# ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 8 8 8 8 9 9
10 10 10 10 10 10
14 14 14 14 14 14
2 25 25 25 25 25 25
36 36 36 35 35 36
3 48 48 48 47 48 48
4 73 73 73 75 73 73
5 132 132 132 140 140 132
6 165 165 165 170 160 165
8 260 260 260 286 302 275
10 436 436 436 485 510 455
12 667 667 667 749 775 690
14 940 940 940 890 975 940
16 1250 1250 1250 1250 1300 1250
18 1625 1625 1625 1475 1750 1625
20 2050 2050 2050 1775 2225 2050
24 2825 2825 2825 2825 3625 3325
CLASS NPS SORF NPT Flanges SW Loose BLRF WN
2500# ½ …. 7 …. 7 7 8
¾ …. 9 …. 8 10 9
1 …. 12 …. 12 12 13
…. 18 …. 17 18 20
…. 25 …. 24 25 28
2 …. 38 …. 37 39 42
…. 55 …. 53 56 52
3 …. 83 …. 80 86 94
4 …. 127 …. 122 133 146
5 …. 210 …. 204 223 244
6 …. 323 …. 314 345 378
8 …. 485 …. 471 533 576
10 …. 925 …. 897 1025 1068
12 …. 1300 …. 1262 1464 1608

ASTM A182 Grade F316L WN Flanges Weight

Weight Of SS 316L Flanges
Standard Class Dia. Bolt Circle Dia. Number of Bolts Bolt Size Dia. of Bolt Hole
AS4087 PN14 95 67 4 M12 14
AS 2129 Flange Table C 95 67 4 13 14
Table D 95 67 4 13 14
Table E 95 67 4 13 14
Table F 95 67 4 13 14
Table H 114 83 4 16 17
Table J 114 83 4 16 17
ANSI B16.5 ANSI 150 89 60 4 13 16
ANSI 300 95 67 4 13 16
ANSI 600 95 67 4 13 16
ANSI 900 121 83 4 19 22
ANSI 1500 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 80 55 4 M10 11
PN10 95 65 4 M12 14
PN16 95 65 4 M12 14
PN20 90 60.5 4 M14 16
PN25 95 65 4 M12 14
PN40 95 65 4 M12 14

ASTM A182 F316L Stainless Steel Flanges Manufacturer In India, Get Large And Small ASTM A182 F316L Forged Flanges Quantity At Factory Price, Class 150 ANSI SS 316L Flanges Stockists in Mumbai.

DIN 1.4401 Socket Weld Flanges Temperature

Pressure Rating Of SS 316L Flanges
ANSI/ASME B16.34 ANSI PRESSURE RATING
Temperature °F Class 150 Class 300 Class 400 Class 600 Class 900 Class 1500 Class 2500
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230