Nickel Alloy 200 / 201 Buttweld Pipe Fittings

ASTM B366 Nickel Alloy 200 Pipe Fittings, Nickel Alloy 200 90 Degree Elbow, Nickel Alloy 201 Buttweld Fittings.

Nickel Alloy 200 Stub End, Nickel Alloy 201 Seamless Fittings, Nickel Alloy DIN 2.4066 / 2.4068 Bend Suppliers.

Nickel Alloy UNS N02200 / UNS N02201 Reducers, ANSI B16.9 Nickel Alloy 201 Tee, ASME SB366 Nickel Alloy 200 Welded Fittings Manufacturers.

Standard Specifications For Nickel Alloy 200 / 201 Buttweld Pipe Fittings

Size	1/2" to 48" Seamless/Buttweld Fittings
Qualification	ISO
Outside Diameter	Seamless/ Buttweld Fitting ( 1/2″～48″), ERW / Welded / Fabricated Buttweld Fitting (1/2″～48″)
Type	Seamless and Welded
Wall Thickness	3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Value Added Services	Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
Thickness	SCH10,SCH20,SCH30,STD SCH40, SCH60, XS, SCH80., SCH100, SCH120, SCH140, SCH160, XXS
Material	Nickel Alloy: ASTM B366 / ASME SB366 ( 200, 201)
Standard	ISO, SNSI, JIS, DIN, GB, ASME B16.9, ASME B16.25, MSS SP-75, DIN2617, JISB2311, JISB2312, JISB2313 / T12459GB / T13401, SH3408, SH3409HG / T21635HG / T21631SY / T05010

Nickel Alloy 200 / 201 Buttweld Pipe Fitting Sizes

Products
1/2″ – 48″ Nickel Alloy 200 / 201 Long Radius Elbows	1/2″ – 48″ Nickel Alloy 200 / 201 Stub Ends
1/2″ – 48″Nickel Alloy 200 / 201 Short Radius Elbows	1/2″ – 48″ Nickel Alloy 200 / 201 Crosses
1/2″ – 48″ Nickel Alloy 200 / 201 Reducing Elbows	1/2″ – 48″Nickel Alloy 200 / 201 Reducing Crosses
1/2″ – 48″ Nickel Alloy 200 / 201 45° Elbows	1/2″ – 48″ Nickel Alloy 200 / 201 180° LR Return Bends
1/2″ – 48″ Nickel Alloy 200 / 201 Tees	1/2″ – 48″ Nickel Alloy 200 / 201 180° SR Return Bends
1/2″ – 48″ Nickel Alloy 200 / 201 Tees	1/2″ – 48″ Nickel Alloy 200 / 201 Pipe Bends
1/2″ – 48″ Nickel Alloy 200 / 201 Reducers	1/2″ – 48″ Nickel Alloy 200 / 201 Couplings
1/2″ – 48″ Nickel Alloy 200 / 201 Concentric Reducers	1/2″ – 48″ Nickel Alloy 200 / 201 Pipe Nipples
1/2″ – 48″ Nickel Alloy 200 / 201 Eccentric Reducers	1/2″ – 48″ Nickel Alloy 200 / 201 Plate Cut Rings
1/2″ – 48″ Nickel Alloy 200 / 201 3D Elbow	1/2″ – 48″ Nickel Alloy 200 / 201 End Caps

Equivalent Grades for Nickel Alloy 200 / 201 Pipe Fittings

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST
Nickel 200	N02200	2.4066	N-100M	Ni 99.2	NW 2200	NA 11	НП-2
Nickel 201	N02201	2.4068	–	LC-Ni 99	NW 2201	NA 12	НП-2

Types Of Nickel Alloy 200 / 201 Butt Weld Pipe Fittings

Nickel Alloy 200 / 201 Pipe Fittings Chemical Composition

Nickel 200	Ni	C	Mo	Mn	Si	Fe	P	S	Cu	Cr
	99.0 min	0.15 max	–	0.35 max	0.1 max	0.4 max	–	0.01 max	0.25 max	–
Nickel 201	Ni	C	Mo	Mn	Si	Fe	P	S	Cu	Cr
	Balance	0.15 max	–	0.35 max	0.35 max	0.40 max	–	0.01 max	0.25 max	–

Nickel Alloy 200 / 201 Pipe Fittings Mechanical Properties

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
8.9 g/cm3	1446 °C (2635 °F)	Psi – 21500 , MPa – 148	Psi – 67000 , MPa – 462	45 %

Nickel 200 / 201 Pipe Fittings Application Industries

• Food processing equipment
• Equipment and appliances
• Architectural railings
• Pharmaceutical and chemical process equipment
• Heat exchangers
• Threaded fasteners
• Springs
• Industrial fabrications

Properties of Nickel Alloy Pipe Fittings

• Excellent corrosion resistance in a wide range of atmospheric environments
• Good oxidation resistance in intermittent service to 870°C and in continuous service to 925°C
• Good resistance to carbide precipitation
• Good machining properties
• Nickel Alloy offers higher strength at elevated temperatures
• Excellent weldability with and without filler metals