ASTM A860 WPHY 70 Fittings Manufacturers In India

ASTM A860 WPHY 70 Fittings and MSS SP-75 Gr 70 Pipe Elbow

Check Weight Formula Of ASTM A860 WPHY 70 Fittings, Carbon Steel WPHY 70 Buttweld Fittings Specification Format.

Carbon steels are high density alloys, which is a characteristic that surmounts to its toughness properties. The fact that the Carbon Steel WPHY 70 Material is highly dense, is indicative that the level of porosity is very low, which in turn means that even if the component is used for high pressure transportation, the chances of deformities occurring are slim. The ASTM A860 WPHY 70 Fittings, which are carbon steel based lack ductility and so they will be able to retain their shape irrespective of the stress applied to them. The oil and gas industry deals with a lot of high pressure transmission, during which the wall of the ASTM A860 Gr WPHY 70 High Yield U Bend gets abraded by the constant fluid or gas flow. If the velocity of the flow is high, the higher will the pressure applied to be on the fittings. Unlike ductile alloys that could crack or become susceptible to failure at such a stage, the furnishing by heat treatment increases the yield strength as well as the mechanical properties of the SA860 WPHY 70 Lateral Tee. High yield components exhibit outstanding performance in such areas, especially if they are butt-welded. CS ASTM A860 WPHY 70 Buttweld Fittings are components that not only offer a softer transition from one pipe to another, but they offer high integrity and are known to be leak-proof. This coupled with the fact that the oil and gas industry consider them a safer and cheaper option makes the Buttweld A860 Gr WPHY 70 Elbow ideal for this application.



A860 WPHY 70 Buttweld Fittings Schedule Chart

A860 WPHY 70 Buttweld Fittings Schedule Chart

A860 Gr WPHY 70 Specification Chart

Specification ASTM A860 WPHY 70 Fittings
Available Types 3D Elbow, 5D Elbow, 10D Elbow, Equal Cross, Pipe Elbow, BW Tee, Bend, (LR) Long Radius Elbow, Pipe Nipple, Reducers, Caps, Stub End, Pipe / Piggable Bend, (SR) Short Radius Elbow, 2D Elbow
Bending Radius Radius =8D, 2D, 3D, 1D, 6D, 10D, 5D, or Custom
Thickness Sch 160s, Sch 40s, Sch 10s, Sch XXS, Sch 5s, Sch 80s
Type Welded / Seamless
Surface Treatment Transparent oil, Rust-proof black oil or hot galvanized
Size 1/2" to 24″Inch
Dimensions MSS-SP-43, ASME B16.9, ASME B16.28, ANSI B16.9

Refer MSS SP 75 WPHY 70 Pipe Fittings Pressure Rating Class, High Yield A860 Gr WPHY 70 U Bend Chemical Composition, Mechanical Characteristics Of Carbon Steel ASTM A 860 WPHY 70 Stub End.


MSS SP 75 WPHY 70 Pipe Fittings Pressure Class

MSS SP 75 WPHY 70 Pipe Fittings Pressure Class

Different Carbon Steel A860 WPHY Fittings Type

MSS SP 75 70 Lateral Tee

MSS SP 75 70 Lateral Tee

WPHY 70 End Cap

WPHY 70 End Cap

A860 Gr 70 Reducing Tee

A860 Gr 70 Reducing Tee

A860 Carbon Steel 70 Stub Ends

A860 Carbon Steel 70 Stub Ends


Manufacturer of Fully Killed Grade WPHY 70 Elbow In India, Carbon Steel A860 WPHY 70 Lateral Tee Suppliers In Mumbai, ASTM A860 Gr WPHY 70 Material Best Price & Fast Delivery.


A860 Grade WPHY 70 Elbow Chemical Analysis

Grade C Mn S P Si Ni Cr Mo Cu Ti V Cb Al
WPHY 70 0.20 1.00-1.45 0.03 0.01 0.15-0.40 0.50 0.30 0.25 0.35 0.05 0.10 0.06

Wide Stockist of Carbon Steel Grade 70 Pipe Reducer, We provide Elbow WPHY 70 In-House Cutting, Buy WPHY 70 Fittings Certified & Tested.

Gr WPHY 70 Material Mechanical Characteristics

Element Elongation Tensile Strength Yield Strength (0.2%Offset)
WPHY 70 28 % 515-690 415

Get Discount On Quenching ASTM A860 WPHY 70 Fittings, Supply High Quality A860 WPHY 70 In India, Visit WPHY 70 Fittings Manufacturers Factory.