Manufacturer of BS3799 Forged Reducing Tee In India, Refer Specification Of ASME B16.11 Stainless Steel Reducing Tee Socket Weld Class 3000
In a piping system, the function of fittings is the modification of pipes such that it fits into the floor plan of the factory. In simpler words, fittings are used to manipulate directional change of pipes. However, the main function of the fitting in a system is to connect pipes to either another pipe or a vessel or a pump. In some instances, factories may purchase pipes of different sizes to modify the pressure, velocity or the volume of the flow of media. Hence, there may be two different sized pipes. Even if the pipes were threaded, it is impossible to join different sized threaded pipes without the use of a fitting. Such times call for a threaded ASME B16.11 Reducing Tee. A reducing tee is nothing but a combination of a reducer and a Tee. Structurally, it is shaped in the form of a tee, which means the ASME B16.11 Socket Weld Reducing Tee has an inlet and two outlets, which is perpendicular to each other at an angle of 90 degrees, thus forming the letter ‘T’. In this fitting, the size of the branch port is produced smaller in comparison to the other ports of the run. The ANSI B16.9 is a standard used in the manufacture of these tees. Similar to other ANSI standards, the B16.9 is detailed with several parameters including the size of the fittings, ANSI B16.9 Reducing Sw Tee Dimensions, its tolerances, markings, the materials etc. Forging the material often yields excellent mechanical properties, irrespective of its quality. In comparison to its former condition, a forged Carbon Steel Threaded Reducing Tee would have better impact resistance and an additional ductility and a smoother, more finished surface. Forging ensures an arrangement of the grain flow of all materials in such a manner that they get adjusted to the shape of the Forged Screwed Unequal Tee. Typically materials like carbon steel, alloy steel, copper-nickel alloys as well as Stainless Steel Threaded Reducing Tee are popular fittings in the oil and gas industry.
ASME B16.11 Reducing Tee
Carbon Steel Threaded Reducing Tee
Stainless Steel Sccket Weld Reducing Tee
ASME B16.11 Reducing Tee Specification
| Specification | ASME B16.11 Reducing Tee |
| MSS SP-43 | Corrosion Resistant Applications, Fabricated and Wrought Butt-Welding Fittings for Low Pressure |
| ASTM A182 – ASME SA182 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| ASME B16.11 | Wrought Buttwelding Fittings |
| ASME B16.11 | Socket – Welding and Threaded, Forged Fittings |
| MSS SP-95 | Bull Plugs & Swage(d) Nipples |
| BS3799 | Specification of screwed and Socket-welding, Steel pipe fittings |
Type Of Socket Weld Reducing Tee
2×2 Inch, 2000 LB, ASTM A105, Carbon Steel Socket Weld Reducing Tee
DN25, 3000#, ASME B16.11, ASTM A105, Socket Weld Reducing Tee
1 1/2 Inch, A351, Class 150 LB, ANSI B16.11 Reducing Sw Tee
1/2 Inch, 6000 LB, ASTM A105, Socket Weld Unequal Tee
1 1/2 X 1 Inch, Bs3799, 3000 LB, Socketweld Forged Unequal Tee
1x3/4 Inch, 3000#, Stainless Steel Socket Weld Reducing Tee
2 × 2 Inch, ASTM A105N, 2000 LB, Forged Unequal Tee 3000lb Socket Weld
2 X 1/2 Inch, CL3000, ASTM A182 SS Socket weld Reducing Tee
Buy Threaded Reducing Tee Types
3/4 Inch, ASTM A105, NPT Ends 3000# Threaded Reducing Tee
2×3 Inch, A182, 3000LB, Stainless Steel Threaded Reducing Tee
3 Inch, ASTM A105, 3000 LB, Carbon Steel Threaded Reducing Tee
2 Inch, ASME B16.11, Class 6000 NPT Reducing Tee
2×2 Inch, FNPT, 2000 LB, Threaded Unequal Tee
DN25, CL3000, ASTM A182 SS Threaded Unequal Tees
2 Inch, ASME B16.11, 150 LB, BS3799 Screwed Forged Unequal Tee
1/3 Inch, 9000#, Hastelloy C22 Forged Pipe Tee
Check Dimensional Tolerances Chart Of Stainless Steel Threaded Reducing Tee, Contact For Bs3799 Threaded Unequal Tee At Low-price, We Provide Different Type Of ASTM A182 SS Reducing Sw Tee In India.
Socket Weld Reducing Tee Dimensions
| Normal Pipe Size | SW Bore | Depth SW | Bore dia |
| B | J | D | |
| 1/2 | 21.95 21.70 |
10 | 16.6 15 |
| 3/4 | 27.30 27.05 |
13 | 21.7 20.2 |
| 1 | 34.05 33.80 |
13 | 27.4 25.9 |
| 1.1/4 | 42.80 42.55 |
13 | 35.8 34.3 |
| 1.1/2 | 48.90 48.65 |
13 | 41.7 40.1 |
| 2 | 61.35 61.10 |
16 | 53.5 51.7 |
| 2.1/2 | 74.20 73.80 |
16 | 64.2 61.2 |
| 3 | 90.15 89.80 |
16 | 79.5 46.4 |
| 4 | 115.80 115.45 |
19 | 103.8 100.7 |
| 1/2 | 4.65 4.10 |
3.75 | 15.5 |
| 3/4 | 4.90 4.25 |
3.90 | 19.5 |
| 1 | 5.70 5.00 |
4.55 | 22 |
| 1.1/4 | 6.05 5.30 |
4.85 | 27 |
| 1.1/2 | 6.35 5.55 |
5.10 | 32 |
| 2 | 6.95 6.05 |
5.55 | 38 |
| 2.1/2 | 8.75 7.65 |
7.00 | 41.5 |
| 3 | 9.50 8.30 |
7.60 | 57.5 |
| 4 | 10.70 9.35 |
8.55 | 66.5 |
3000# SW Reducing Tee Dimensions
| Normal Pipe Size | SW Bore | Depth SW | Bore dia |
| B | J | D | |
| 1/2 | 21.95 21.70 |
10 | 16.6 15 |
| 3/4 | 27.30 27.05 |
13 | 21.7 20.2 |
| 1 | 34.05 33.80 |
13 | 27.4 25.9 |
| 1.1/4 | 42.80 42.55 |
13 | 35.8 34.3 |
| 1.1/2 | 48.90 48.65 |
13 | 41.7 40.1 |
| 2 | 61.35 61.10 |
16 | 53.5 51.7 |
| 2.1/2 | 74.20 73.80 |
16 | 64.2 61.2 |
| 3 | 90.15 89.80 |
16 | 79.5 46.4 |
| 4 | 115.80 115.45 |
19 | 103.8 100.7 |
| Normal Pipe Size | SW WT |
Body WT |
Center to bottom of SW |
| C | G | A | |
| 1/2 | 4.65 4.10 |
3.75 | 15.5 |
| 3/4 | 4.90 4.25 |
3.90 | 19.5 |
| 1 | 5.70 5.00 |
4.55 | 22 |
| 1.1/4 | 6.05 5.30 |
4.85 | 27 |
| 1.1/2 | 6.35 5.55 |
5.10 | 32 |
| 2 | 6.95 6.05 |
5.55 | 38 |
| 2.1/2 | 8.75 7.65 |
7.00 | 41.5 |
| 3 | 9.50 8.30 |
7.60 | 57.5 |
| 4 | 10.70 9.35 |
8.55 | 66.5 |
Class 6000 Socket Weld Reducing Tee
| Normal Pipe Size | SW Bore | Depth SW | Bore dia |
| B | J | D | |
| 1/2 | 21.95 21.70 |
10 | 12.5 11 |
| 3/4 | 27.30 27.05 |
13 | 16.3 14.8 |
| 1 | 34.05 33.80 |
13 | 21.5 19.9 |
| 1.1/4 | 42.80 42.55 |
13 | 30.2 28.7 |
| 1.1/2 | 48.90 48.65 |
13 | 34.7 33.2 |
| 2 | 61.35 61.10 |
16 | 43.6 42.1 |
| 1/2 | 5.95 5.20 |
4.80 | 19.5 |
| 3/4 | 6.95 6.05 |
5.55 | 22.5 |
| 1 | 7.90 6.95 |
6.35 | 27 |
| 1.1/4 | 7.90 6.95 |
6.35 | 32 |
| 1.1/2 | 8.90 7.80 |
7.15 | 38 |
| 2 | 10.90 9.50 |
8.75 | 41 |
Carbon Steel Socket Weld Reducing Tee Weight
| NPS | B | L1 | C | G | D | A | Weight |
|---|---|---|---|---|---|---|---|
| inch | millimeter | socket weld | millimeter | millimeter | millimeter | millimeter | ~Kilogram/pce |
| 1/4 3/8 1/2 3/4 |
14.20 17.60 21.80 27.20 |
9.53 9.53 9.53 12.50 |
3.30 3.51 4.09 4.27 |
3.02 3.20 3.73 3.91 |
8.86 12.14 15.42 20.55 |
11.11 13.49 15.88 19.05 |
0.11 0.16 0.34 0.41 |
| 1 1¼ 1½ 2 |
33.90 42.70 48.80 61.20 |
12.50 12.50 12.50 16.00 |
4.98 5.28 5.54 6.05 |
4.55 4.85 5.08 5.54 |
26.26 34.67 40.51 52.12 |
22.23 26.99 31.75 38.10 |
0.65 0.95 1.33 2.20 |
Dimensions Standard Of 3000# Threaded Reducing Tee And 6000# Socket Weld Reducing Tee, Schedule Chart Of Alloy Steel Socket weld Forged Unequal Tee In Kilogram.
B16.11 Threaded Reducing Tee Dimensions
Class 2000 Stainless Steel Threaded Reducing Tee Dimensions Chart According to ASME B16.11
| Normal Pipe Size | Minimum Length of Thread | O.D. of Band D |
Center to End A |
Minimum WT |
|
| B | J | ||||
| 1/2 | 10.9 | 13.6 | 33 | 28 | 3.18 |
| 3/4 | 12.7 | 13.9 | 38 | 33 | 3.18 |
| 1 | 14.7 | 17.3 | 46 | 38 | 3.68 |
| 1.1/4 | 17 | 18 | 56 | 44 | 3.89 |
| 1.1/2 | 17.8 | 18.4 | 62 | 51 | 4.01 |
| 2 | 19 | 19.2 | 75 | 60 | 4.27 |
| 2.1/2 | 23.6 | 28.9 | 92 | 76 | 5.61 |
| 3 | 25.9 | 30.5 | 109 | 86 | 5.99 |
| 4 | 27.7 | 33 | 146 | 106 | 6.55 |
3000# NPT Reducing Tee Dimensions
| Normal Pipe Size | Minimum Length of Thread | O.D. of Band D |
Center to End A |
Minimum WT |
|
| B | J | ||||
| 1/2 | 10.9 | 13.6 | 38 | 33 | 4.09 |
| 3/4 | 12.7 | 13.9 | 46 | 38 | 4.32 |
| 1 | 14.7 | 17.3 | 56 | 44 | 4.98 |
| 1.1/4 | 17 | 18 | 62 | 51 | 5.28 |
| 1.1/2 | 17.8 | 18.4 | 75 | 60 | 5.56 |
| 2 | 19 | 19.2 | 84 | 64 | 7.14 |
| 2.1/2 | 23.6 | 28.9 | 102 | 83 | 7.65 |
| 3 | 25.9 | 30.5 | 121 | 95 | 8.84 |
| 4 | 27.7 | 33 | 152 | 114 | 11.18 |
ANSI B16.11 Class 6000 Threaded Pipe Reducing Tee Dimensions with Tolerances
| Normal Pipe Size | Minimum Length of Thread | O.D. of Band D |
Center to End A |
Minimum WT |
|
| B | J | ||||
| 1/2 | 10.9 | 13.6 | 46 | 38 | 8.15 |
| 3/4 | 12.7 | 13.9 | 56 | 44 | 8.53 |
| 1 | 14.7 | 17.3 | 62 | 51 | 9.93 |
| 1.1/4 | 17 | 18 | 75 | 60 | 10.59 |
| 1.1/2 | 17.8 | 18.4 | 84 | 64 | 11.07 |
| 2 | 19 | 19.2 | 102 | 83 | 12.09 |
| 2.1/2 | 23.6 | 28.9 | 121 | 95 | 15.29 |
| 3 | 25.9 | 30.5 | 146 | 106 | 16.64 |
| 4 | 27.7 | 33 | 152 | 114 | 18.67 |
Check Availability Of Copper Nickel Threaded Tee, 3000# Socket Weld Reducing Tee Dimensions, One Of The Fastest Growing Suppliers Of Class 9000 Screwed Forged Unequal Tee In India.
Socket weld Reducing Tee Pressure Chart
| ASME B16.11 Reducing Tee Temperature (psig) | |||||
|---|---|---|---|---|---|
| Temperature | Class | ||||
| 150 | 300 | ||||
| 1/4 - 1 in. | 1 1/4 - 2 in. | 2 1/2 - 3 in. | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
Looking To Buy ASME B16.11 Stainless Steel Socket Weld Reducing Tee? Contact Rajveer Stainless And Alloy, A Reliable ASME B16.11 Reducing Tee manufacturers in India, Get In Touch For Assistance 3000LB Socket Weld Reducing Tee Carbon Steel, Own Stockyard Of Duplex Steel Socket weld Unequal Tee.
Forged Threaded Reducing Tee Weight Table
| Class 2000 | NPS | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 |
| B | – | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/16 | 4 5/16 | 5 3/4 | |
| F | – | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 2 1/16 | 2 1/2 | 3 1/8 | |
| Wt | – | 0.188 | 0.236 | 0.435 | 0.740 | 1.058 | 1.375 | 1.740 | 2.883 | 7.750 | 11.313 | 19.125 | |
Class 3000 |
1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
| B | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 6 | |
| F | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | |
| Wt | 0.250 | 0.290 | 0.500 | 0.750 | 1.188 | 1.988 | 2.235 | 3.000 | 4.930 | 7.375 | 13.588 | 19.063 | |
Class 6000 |
1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
| B | 1 1/6 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 5 3/4 | – | |
| F | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | – | |
| Wt | 0.250 | 0.640 | 0.500 | 1.438 | 2.188 | 2.785 | 4.688 | 5.750 | 9.500 | 15.000 | 30.563 | – | |
Dimensional Tolerances Forged Reducing Tee
NPS |
1/2 to 2½ |
3 to 3½ |
4 |
5 to 8 |
10 to 18 |
20 to 24 |
26 to 30 |
32 to 48 |
O.D. |
+1.6 |
1.6 |
1.6 |
+2.4 |
+4 |
+6.4 |
+6.4 |
+6.4 |
I.D. at End |
0.8 |
1.6 |
1.6 |
1.6 |
3.2 |
4.8 |
+6.4 |
+6.4 |
Center to End (C / M) |
2 |
2 |
2 |
2 |
2 |
2 |
3 |
5 |
Wall Thickness (t) |
Not less than 87.5% of Nominal Wall Thick. |
|||||||
